Networker

Re: [Networker] Power Receptable for ADIC i2000

2006-02-07 03:18:34
Subject: Re: [Networker] Power Receptable for ADIC i2000
From: "Ballinger, John M" <john.ballinger AT PNL DOT GOV>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Tue, 7 Feb 2006 00:16:42 -0800
Jim,

We're doing the same but with one i2k library.
Were you able to get your question asked?

Thanks - John 

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Jim Ruskowsky
Sent: Tuesday, January 31, 2006 7:04 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Power Receptable for ADIC i2000

Hey gang -

I know this isn't a specific NetWorker question, but since it deals with
the periphery that I'm sure many of you are using I'll throw it out
here.

We are purchasing two new i2000's (LTO3 drives / redundant power) for
two of our locations.  The reference guide from the web tells me in one
paragraph that I need to install an L6-30 connector, then the following
chart shows the need for a NEMA L5-30.  My sales person told me I needed
a 6-30R.

Now the only simlarity here is 30A capacity.

Can anybody with some real life experience with these in USA tell me
what that have in the floor.  I also have a call in to ADIC, again, on
this issue.  I am trying to avoid having to call the electricians back
at both sites due to lack of accurate information up front.

Thanks in advance

Jim




Jefferies archives and reviews outgoing and incoming e-mail.  It may be
produced at the request of regulators or in connection with civil
litigation. 
Jefferies accepts no liability for any errors or omissions arising as a
result of  transmission. Use by other than intended recipients is
prohibited.

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>