Thanks to Thierry, Peter and Chirsto for responding.
Actually, as Peter requested, I went and deleted devices from the
jukebox menu. And re-added them in the correct sequence. Now jbverify
does not report any error. But, as per Thierry, I did not do correct
thing. I should have tried rename option. I will try labeling.
Let me know if I need to take any other precautions.
Thanks,
-Balki
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Faidherbe, Thierry
Sent: Tuesday, January 10, 2006 3:53 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] jbverify error
Balki,
Once you know the new mapping between drive# and /dev/rmt/...
naming, you have a simple way to correct the jbox resource
without having to recreate the entire lib :
Create a dummy device ( /dev/rmt/toto for sample) and disable
the new networker device once created.
Unmount all drives from the lib.
Edit then the jbox resource and start swapping the names :
ex to swap 2cbn and 0cbn devices, look at devices field and
replace /dev/rmt/2cbn -> /dev/rmt/toto then Apply
then /dev/rmt/0cbn -> /dev/rmt/2cbn then Apply
then /dev/rmt/toto -> /dev/rmt/0cbn then Apply
keeping in mind line #0 correspond to drive #0,
line #1 -> Drive#1, ....
Then delete dummy /dev/rmt/toto device. Doing so, you will not
have to adapt your pool setting. Same way has to be done
if you are using DDS Sharing devices.
HTH,
Th
Kind regards - Bien cordialement - Vriendelijke groeten,
Thierry FAIDHERBE
HP Services - Storage Division
Tru64 Unix and Legato Enterprise Backup Solutions Consultant
********* ********* HEWLETT - PACKARD
******* h ******* 1 Rue de l'aeronef/Luchtschipstraat
****** h ****** 1140 Bruxelles/Brussel/Brussels
***** hhhh pppp *****
***** h h p p ***** 100/102 Blv de la Woluwe/Woluwedal
***** h h pppp ***** 1200 Bruxelles/Brussel/Brussels
****** p ****** BELGIUM
******* p *******
********* ********* Phone : +32 (0)2 / 729.85.42
Mobile : +32 (0)498/ 94.60.85
Fax : +32 (0)2 / 729.88.30
I N V E N T Email/MSN : thierry.faidherbe(at)hp.com
Internet : http://www.hp.com/
________________________________________________________________________
MOBISTAR SA/NV
CSO/CTO/CEO/SSD/SBI
SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2 / 745.75.81
Avenue Jean Mermoz, 32 Fax : +32 (0)2 / 745.89.56
6041 GOSSELIES Email : tfhaidhe(at)mail.mobistar.be
BELGIUM Web : http://www.mobistar.be/
________________________________________________________________________
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Chamkura, Balki
Sent: Monday, January 09, 2006 8:12 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] jbverify error
All:
i am having some configuration issues with jukebox. I am using
Networker 7.2 on solaris 8. The drive and device mapping has changed.
part of nsrjb command ,
drive 1 (/dev/rmt/0cbn) slot :
drive 2 (/dev/rmt/2cbn) slot :
drive 3 (/dev/rmt/3cbn) slot :
drive 4 (/dev/rmt/1cbn) slot :
Like you can see,
now drive 2 maps to 2cnb. Earlier it was mapping to 1cbn.
Likes drive 3 and 4 are wrongly mapped.
I am not able to use drive 2,3 and 4.
How can I fix this.
I am enclosing the jbverify log below.
Thanks,
-Balki
KSH#jbverify
Jbverify is running on host piaqsvr02
no enabled stand alone devices found.
Processing jukebox devices...
Processing jukebox piaq_jb:
Testing drive 1 (/dev/rmt/0cbn) of JB piaq_jb
Testing drive 2 (/dev/rmt/2cbn) of JB piaq_jb
failed to detect loaded volume on drive /dev/rmt/2cbn
even after 10 tries. Giving up...
Error reported in eject tape from drive /dev/rmt/2cbn! But device is
offline.
Failed in testing drive 2(/dev/rmt/2cbn) of JB piaq_jb: Unable to
detect loaded state!
Testing drive 3 (/dev/rmt/3cbn) of JB piaq_jb
failed to detect loaded volume on drive /dev/rmt/3cbn
even after 10 tries. Giving up...
Error reported in eject tape from drive /dev/rmt/3cbn! But device is
offline.
Failed in testing drive 3(/dev/rmt/3cbn) of JB piaq_jb: Unable to
detect loaded state!
Testing drive 4 (/dev/rmt/1cbn) of JB piaq_jb
failed to detect loaded volume on drive /dev/rmt/1cbn
even after 10 tries. Giving up...
Error reported in eject tape from drive /dev/rmt/1cbn! But device is
offline.
Failed in testing drive 4(/dev/rmt/1cbn) of JB piaq_jb: Unable to
detect loaded state!
Jukebox piaq_jb on piaqsvr02 successfully processed.
Finished processing jukebox devices.
**********************************************************************
Summary report of jbverify
======= ====== == ========
Hostname Device Handle Blocksize Jukebox Drv No. Status
-------- ------------- --------- ------- ------- ------
piaqsvr02 /dev/rmt/0cbn 65536 piaq_jb 1 Pass
piaqsvr02 /dev/rmt/2cbn 65536 piaq_jb 2 Fail
piaqsvr02 /dev/rmt/3cbn 65536 piaq_jb 3 Fail
piaqsvr02 /dev/rmt/1cbn 65536 piaq_jb 4 Fail
**********************************************************************
Exiting jbverify successfully.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
