Thanks to Maarten and Maiello.
Probably we will upgrade the software to 7.2.1 as recommended by Legato
Support.
** Manual Clone also fails if the same ssid spans to two tapes. It does
not mount the first backup tape. (might be, it can not identify the head
or tail of the save set). I think, storage node or pool doesn't have
problem. It may be a software bug.
We will do another test after removing drive restriction from both
backup and clone pool.
Any comments on this?
Regards,
Rathin
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Robert Maiello
Sent: Tuesday, November 08, 2005 11:25 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Auto Clone Fails
What happens if you list all the ssid for the group and then
manually clone them with nsrclone? Does it mount the tapes to clone?
If not, if you load the tapes that an ssid spans into the drives
manually and then run nsrclone does it work?
It seems you need to figure out if it is a mounting problem or
storage node and pool problem?..a mounting problem being the code
messing up. Did Legato have any ideas?
Robert Maiello
Pioneer Data Systems
On Tue, 8 Nov 2005 10:07:10 +0100, Maarten Boot (CWEU-USERS/CWNL)
<Maarten.Boot AT NL.COMPUWARE DOT COM> wrote:
>No direct ideas spring to mind except that an upgrade (for server and
>storagenode) to 7.1.3 could be an idea. Many cloning and staging
patches
have
>been integrated into 7.1.3 and the upgrade from 7.1.1 to 7.1.3 does not
need
>a upgrade lisence, you can just download the new versions from the
legato
>website.
>
>Maarten
>
>
>On Tuesday 08 November 2005 05:03, Rathindra Nath Dhali Operations IT
wrote:
>> Dear NetWorker experts,
>>
>> We are having problem in "Automatic Cloning". The scenario is
described
>> below:
>>
>>
>>
>> Host A: NetWorker Server (HP-UX). Version: 7.1.1
>>
>> Host B: NetWorker Dedicated Storage Node (Solaris): 7.1.1
>>
>>
>>
>> * Backup runs on host B and Clones on host A.
>>
>> * Backup and Cloning succeeds if all save-sets goes to only one tape.
>>
>> * Backup succeeds always but Cloning fails if save-sets span over two
>> tapes. When backup is over and auto-clone is triggered, it waits for
the
>> first tape to mount. However, it can not find the tape. After a wile
the
>> save group ends without cloning.
>>
>> Please note that we are using the same auto changer, and shared
drives
>> (HP MSL6060, 4 LTO2 drives)
>>
>>
>>
>> Can anyone help solving the issue?
>>
>>
>>
>>
>>
>> Regards,
>>
>>
>>
>> Rathin
>>
>>
>>
>> -------------------------------------
>>
>> Rathindra Nath Dhali
>>
>> IT Operations
>>
>> GrameenPhone Ltd.
>>
>> Mobile: +88 017 1500978
>>
>>
>>
>>
>> To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
>> "signoff networker" in the body of the email. Please write to
>> networker-request AT listserv.temple DOT edu if you have any problems wit
this
>> list. You can access the archives at
>> http://listserv.temple.edu/archives/networker.html or via RSS at
>> http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
>--
>Maarten Boot,
>Compuware Europe B.V.
>Hoogoorddreef 5
>1101 BA Amsterdam
>Tel: +31 20 312 6511
>
>To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
>body of the email. Please write to
networker-request AT listserv.temple DOT edu
if you have any problems
>wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
>via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>=======================================================================
==
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
