Re: [Networker] Does anyone have Legatoo Server running AIX 5.3 w orking with the ADIC Scaler i2000
2005-11-04 14:31:40
Looks like you are running a much newer firmware than me. Not sure if your
newer version is required for the LTO-3 drives, but you might have ADIC
change the firmware level. We had some issues in the past when our firmware
was upgraded...
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]On Behalf Of Barber, Tony
Sent: Friday, November 04, 2005 12:18 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Does anyone have Legatoo Server running AIX 5.3
working with the ADIC Scaler i2000
We have been trying to get a Legato Server running AIX 5.3
to work with the ADIC Scalar i2000 Jukebox.
At first we connected the ADIC to the server thru a Fiber Card.
There are two LTO-3 Tape Drives directly connected thru their own Fiber
Card.
We could not see the ADIC Jukebox using the inquire command, but we
could see the two Tape Drives.
We changed the connection to the ADIC Jukebox to a SCSI Connection.
We can now see all devices via the inquire command.
hdfscclgto:/:-#-> inquire
[email protected]:IBM ST336753LC 4335|Disk, /dev/rhdisk0
[email protected]:IBM HSBPD6X PU4SCSI0017|(Unknown Device Type d)
[email protected]:IBM ST336753LC 4335|Disk, /dev/rhdisk1
[email protected]:IBM HSBPD6X PU4SCSI0017|(Unknown Device Type d)
[email protected]:ADIC Scalar i2000 300A|Autochanger (Jukebox)
S/N: ADIC203101567_LL0
ATNN:ADIC 203101567_LL0
[email protected]:EMC SYMMETRIX 5670|Disk, /dev/rhdisk2
S/N: 430063000000
[email protected]:IBM ULTRIUM-TD3 5481|Tape, /dev/rmt1.1
S/N: F001A0E007
ATNN:IBM ULTRIUM-TD3
F001A0E007
WWNN:500308C001A0E007
WWPN:500308C001A0E008
PORT:00000001
[email protected]:IBM ULTRIUM-TD3 5481|Tape, /dev/rmt0.1
S/N: F001A0E001
ATNN:IBM ULTRIUM-TD3
F001A0E001
WWNN:500308C001A0E001
WWPN:500308C001A0E002
PORT:00000001
hdfscclgto:/:-#->
The only problem now is that jbconfig cannot see the ADIC i2000
hdfscclgto:/:-#-> jbconfig
1) Configure an AlphaStor/SmartMedia Jukebox.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 2
jbconfig: Jukebox error: scsi command MODE_SENSE failed
hdfscclgto:/:-#->
hdfscclgto:/:-#-> jbconfig
1) Configure an AlphaStor/SmartMedia Jukebox.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 4
Enter the number corresponding to the type of jukebox you are
installing:
1) ADIC-1200c/ADIC-1200d 20) Exabyte Jukebox 38) HP-Optical
2) ADIC-VLS 21) Hitachi ML010 Series 39) Sony TSL-7000
3) ARC DiamondBack 22) HP-C1553A/Surestore 12000e 40) Sony
TSL-A500C
4) Breece Hill Saguaro 23) HP-C1557A/Surestore 12000e 41) Sony
TSL-AIT
5) Breece Hill 24) HP C5713A 42) Digital 4mm DAT
TLZ9L
6) Philips Blackjack 25) Hewlett-Packard A4853A 43) Digital 4mm
DAT (TLZxx)
7) DLI Libra Series 26) Metrum (SCSI) 44) Digital TL800
Series
8) Quantum DLT/Digital DLT 27) Qualstar 45) Digital TL810
Series
9) Exabyte 10e or 10h 28) Spectralogic 46) Digital TL820
Series
10) Exabyte 10i 29) STK 9704/Lago 340 47) Digital TL893
11) Exabyte 18D 30) STK 9708/Lago 380 (SCSI) Datawheel 48)
Digital TL893
12) Exabyte 60 31) StorageTek 9730 49) Digital TL896
13) Exabyte 120 32) StorageTek 9738 50) Digital TL896
14) Exabyte 210 33) STK 9708/Lago 380 (SCSI) Datawheel 51)
Digital TL899
15) Exabyte 218 34) Dell PowerVault 130T 52) Digital TL899
16) Exabyte 220 35) IBM 3570 53) Digital Optical
17) Exabyte 230D 36) IBM 7331/IBM 9427 54) Digital TK
Series
18) Exabyte 400 Series 37) ATL/Odetics SCSI 55) Standard SCSI
Jukebox
19) Exabyte 690D
Choice? 1
Installing an 'ADIC-1200c/ADIC-1200d' jukebox.
What name do you want to assign to this jukebox device? JUKEBOX
Enter the control port of the jukebox in the following format:
[email protected] Pathname of the control port for the jukebox device?
[email protected]
Unable to access device "ADIC-1200c/ADIC-1200d" on control port
"[email protected]".
Have you already installed the "drivers" package on this machine?
(yes/no) yes
jbconfig: error, There appears to be something incorrect about your
driver
installation. Please consult your driver documentation
to help you troubleshoot your installation.
hdfscclgto:/:-#->
-----------------------
TONY BARBER
UNIX SYSTEMS ADMINISTRATOR
775-886-3989 (Direct) 775-720-9475 (Cell)
tony.barber AT hdfsi DOT com
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if
you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- Re: [Networker] Does anyone have Legatoo Server running AIX 5.3 w orking with the ADIC Scaler i2000,
Willeat, Todd <=
|
|
|