It seems your jukebox does not provide the expected answers regarding
serial numbers.
At 7.2.1 if you use auto detected devices Networker expects that this
information will be provided.
You can however configure the jukebox by using option 4 of the jbconfig.
Itzik
> -----Original Message-----
> From: Legato NetWorker discussion
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Lars Hecking
> Sent: Friday, October 28, 2005 14:49
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] Overland LXB and jukebox config
>
> I have googled and searched the archive, but found nothing.
>
> I'm trying to configure an Overland LoaderXpress with Networker:
> - RedHat Enterprise 3
> - Sun diffSCSI card, sym53c8xx driver
> - LoaderXpress LXL7110
> - Networker 7.2.1
>
> A test backup to the tape drive worked fine, but I cannot
> configure the jukebox. sjisn and jbconfig don't see it.
>
> # cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: LG Model: CD-ROM CRN-8245B Rev: 1.16
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 04 Lun: 00
> Vendor: QUANTUM Model: DLT7000 Rev: 245F
> Type: Sequential-Access ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 06 Lun: 00
> Vendor: OVERLAND Model: LXB Rev: 0524
> Type: Medium Changer ANSI SCSI revision: 02
>
> # /usr/sbin/inquire
> [email protected]:LG CD-ROM CRN-8245B1.16|CD-ROM, /dev/sg0
> [email protected]:QUANTUM DLT7000 245F|Tape, /dev/nst0
> S/N: PXA32S0531
> [email protected]:OVERLANDLXB 0524|Autochanger
> (Jukebox), /dev/sg2
> S/N: 2U04603468 #
> sjisn [email protected] None of the methods tried returned drive
> serial number information
> SJISN: Input/output error
> usage: sjisn [email protected]
> # sjisn 1.6.0
> None of the methods tried returned drive serial number information
> SJISN: Input/output error
> usage: sjisn [email protected]
>
> # jbconfig
> 1) Configure an AlphaStor/SmartMedia Jukebox.
> 2) Configure an Autodetected SCSI Jukebox.
> 3) Configure an Autodetected NDMP SCSI Jukebox.
> 4) Configure an SJI Jukebox.
> 5) Configure an STL Silo.
>
> What kind of Jukebox are you configuring? [1] 2
> jbconfig: Jukebox error: library is becoming ready or not on-line
>
> #
>
> Yes, I am aware that the Overland is not on Legato's HWC
> list, but I thought there might be a way to get it to work
> anyway? I found an article on Overland's support site "Why
> can't I see my Overland LXB Library with Backup Exec for
> NetWare?", stating that Veritas doesn't recognise the LXB
> because its SCSI ID is higher than the tape drive's (6 vs. 4)
> and suggesting to change the LXB's ID to 3. I tried that
> with no success.
>
> To sign off this list, send email to
> listserv AT listserv.temple DOT edu and type "signoff networker" in
> the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any
> problems wit this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or via RSS
> at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
