Olaf, 

Thanks for the reply.  I tried what you suggested but unfortunately,
after electing to install Windows, the Windows setup informed me it
could not locate any hard disks(!).  Have you ever experienced anything
like this?

BTW, the machine being recovered to is an HP Proliant DL380 with an HP
Smart Array 6i controller.

 
Best Regards,
 
Vince
 

Vince Howard
Programmer/UNIX System Administrator
IT Section
Wansbeck District Council
Front Street West
Bedlington
Northumberland
NE22 5TU
UK
 
Tel (DDI): +44 (0)1670 843472
Fax:       +44 (0)1670 843484
e-mail:    v.howard AT wansbeck.gov DOT uk

-----Original Message-----
From: Olaf Zaplinski [mailto:o.zaplinski AT broadnet DOT de] 
Sent: Thursday, July 07, 2005 10:13 AM
To: Legato NetWorker discussion
Subject: Re: [Networker] NetWorker Disaster Recovery (again)

Hi,

Vince Howard wrote:
> Sorry, forgot to mention that before I managed to get the recovered
> client to boot at all it came up with a message, something to the
effect
> of "Windows 2000 could not boot due to hard disk configuration
> problems".

I regularly see this when I recover windows boxes to different hardware.

What you should try next is:

- boot from the Windows CD
- if it asks, say that you want to install Windows and not to repair it
- it should detect your installed Windows and now ask if it should
repair 
it, say yes here

This worked fine several times here. I guess the most important thing is

that the HAL does not change. If it was "ACPI multiprocessor", then the
new 
system should also use this HAL.

Our Exchange (2000) server is sitting on the third hardware by now
(Intel P3 
server -> Intel Xeon server -> Dell 2650) and is still running fine.

Olaf

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

This e-mail and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom
they are addressed.  If you have received this e-mail in error please
notify the originator of the message.

Any views expressed in this message are those of the individual
sender, except where the sender specifies and with authority,
states them to be the views of Wansbeck District Council.

This footer also confirms that this e-mail message has been scanned
for the presence of computer viruses.

Wansbeck District Council Web Site is: www.wansbeck.gov.uk

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=