Networker

Re: [Networker] ndmp restore - connect auth: connection has not been authorized

2004-11-30 15:29:05
Subject: Re: [Networker] ndmp restore - connect auth: connection has not been authorized
From: Itzik Meirson <imeirson AT MBI.CO DOT IL>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Tue, 30 Nov 2004 22:27:41 +0200
Ontap 6.5 supports NDMP 4 as well as Networker 7.x.
As such the is no good reason to limit the NDMP protocol to NDMP 3 by
using ndmpd ?maxversion? 
Itzik

> -----Original Message-----
> From: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] On Behalf Of bob flynn S3
> Sent: Tuesday, November 30, 2004 22:28
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] ndmp restore - connect auth: 
> connection has not been authorized
> 
> ok root password is < 8 characters - I got bitten by this one 
> previously.
> 
> Where you say - "I think that the NDMP version between Ontap 
> 6.5.2 and NW
> 7.1 should be 4!"
> 
> do you have any documentation or reference to support ? I'll 
> try anyhow , but a reference from either Legato or Net App 
> would be useful for long term configuration.
> 
> 
> 
> 
> ----- Original Message -----
> From: "Itzik Meirson" <imeirson AT MBI.CO DOT IL>
> To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
> Sent: Tuesday, November 30, 2004 7:01 PM
> Subject: Re: [Networker] ndmp restore - connect auth: 
> connection has not been authorized
> 
> 
> I think that the NDMP version between Ontap 6.5.2 and NW 7.1 
> should be 4!
> Also make sure that the root password is not more than 8 characters.
> To debug the issue first just try to mount a volume on the 
> Netapp drive.
> If this does not succeed you may have a DNS or reverse DNS 
> name resolution problem.
> To debug from the Netapp side you can turn on ndmpd 
> debugging. It will probably reveal the reason for the failure.
> Itzik
> 
> -----Original Message-----
> From: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
> On Behalf Of bob flynn S3
> Sent: Tuesday, November 30, 2004 20:35
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] ndmp restore - connect auth: connection 
> has not been authorized
> 
> Hi,
> 
> I am attempting to do a NDMP restore from a
> 
> NetApp filer ( 6.5.2.R1 ) via a Solaris 8 Networker 7.1 build 230
> 
> 
> Once I have picked the correct data and verified I have the 
> correct tapes available, I get the following message;
> 
> ------ Error ------
> connect auth: connection has not been authorized
> 
> The NDMP connection has not been sucessfully authorized on <hostname>
> 
> ------ Error --------
> 
> Things I have checked so far.
> 
> 1. That ndmpd is running and is the correct version.
> 
> Yes it is running and is version 3.
> 
> 2. That the root password is correct on the filer
> 
> I logged on to the filer as root.
> 
> 3. That the root password on the tape device in Legato is set 
> correctly.
> 
> I reset this to ensure it was correct.
> 
> Still no joy.
> 
> I did the following in trying to verify that the backup 
> server and filer are talking successfully.
> 
> # inquire -N
> Enter NDMP Tape Server name: ? < hostname > Enter NDMP user 
> name: ? root Enter 'root' password on NDMP host 'britney' 
> (characters will not be
> echoed):
> 
> Communicating to devices on NDMP Server 'britney', this may 
> take a while...
> 
> this does not return..
> 
> At this stage there is no further output..
> 
> I have verified that I can ping between the two machine and 
> tried this using IP address - no joy. I am unsure if this is 
> a different problem or a showing an underlying issue. Any 
> help appreciated.
> 
> Tks.
> 
> 
> The information contained in this e-mail and in any 
> attachments is confidential and is designated solely for the 
> attention of the intended recipient(s). If you are not an 
> intended recipient, you must not use, disclose, copy, 
> distribute or retain this e-mail or any part thereof. If you 
> have received this e-mail in error, please notify the sender 
> by return e-mail and delete all copies of this e-mail from 
> your computer system(s).
> Please direct any additional queries to: communications AT s3group DOT com.
> Thank You.
> 
> --
> Note: To sign off this list, send a "signoff networker" 
> command via email to listserv AT listmail.temple DOT edu or visit 
> the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you 
> can also view and post messages to the list. Questions 
> regarding this list should be sent to stan AT temple DOT edu 
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> 
> **************************************************************
> **************
> **********************
> The contents of this email and any attachments are confidential.
> It is intended for the named recipient(s) only.
> If you have received this email in error please notify the 
> system manager or the sender immediately and do not disclose 
> the contents to any one or make copies.
> 
> MBI - System Team
> **************************************************************
> **************
> **********************
> 
> --
> Note: To sign off this list, send a "signoff networker" 
> command via email to listserv AT listmail.temple DOT edu or visit 
> the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you 
> can also view and post messages to the list. Questions 
> regarding this list should be sent to stan AT temple DOT edu 
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> 
> The information contained in this e-mail and in any 
> attachments is confidential and is designated solely for the 
> attention of the intended recipient(s). If you are not an 
> intended recipient, you must not use, disclose, copy, 
> distribute or retain this e-mail or any part thereof. If you 
> have received this e-mail in error, please notify the sender 
> by return e-mail and delete all copies of this e-mail from 
> your computer system(s).
> Please direct any additional queries to: communications AT s3group DOT com.
> Thank You.
> 
> --
> Note: To sign off this list, send a "signoff networker" 
> command via email to listserv AT listmail.temple DOT edu or visit 
> the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you 
> can also view and post messages to the list. Questions 
> regarding this list should be sent to stan AT temple DOT edu 
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 

**************************************************************************************************
The contents of this email and any attachments are confidential.
It is intended for the named recipient(s) only.
If you have received this email in error please notify the system manager or  
the 
sender immediately and do not disclose the contents to any one or make copies.

MBI - System Team
**************************************************************************************************

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=