Hmmm, the M1500 and M2500 should not be this hard to work with but
can be.

The one thing you need to do with these libraries is go through the
configuration menu and make sure that any drives you don't have in it are
turn off/disabled in the configuration menu..ie it may think a second
drive is there.   You then want to make sure that an inquire and more
importantly an sjirjc 2.2.0 matches what the library is configured as.
ie.. does it show the number of drives and load ports you want?  Does
it match the front panel configuration?   Bar code support on in the
front panel and sjirjc?   You don't want an extra drive reported  if
it isn't there.

Since it was working...did a drive assignment move when you switched
controllers? SCSI IDs?...ie. is /dev/rmt/xxx still where it was before.

I think once you go through everything a jbconfig will work.

Robert Maiello
Pioneer Data Systems


On Thu, 2 Sep 2004 10:19:12 -0400, Ray Pengelly <ray AT BIOMED.QUEENSU DOT CA> 
wrote:

>I had removed the jukebox but not he device. I tried removing the device but
>I get the same result. I have a Sun L25 (Rebadged Quantum ATL M1500) with 1
>SDLT320 drive. I am running SBU 6.1.4 build562. I recently applied some
>updates. Could they be causing the problems?
>
>Here is the output from jbconfig.
>

>dmstore/> jbconfig
>         1) Install an Autodetected SCSI Jukebox.
>         2) Install an Autodetected NDMP SCSI Jukebox.
>         3) Install an SJI Jukebox.
>
>What kind of Jukebox are you installing? [1] 1 These are the SCSI Jukeboxes
>currently attached to your system:
>  1) [email protected]: Standard SCSI Jukebox, Vendor <M4 DATA>, Product
><MagFile> Which one do you want to install? 1 Installing an 'Standard SCSI
>Jukebox' jukebox.
>Name you would like to assign to the jukebox device? L_25 A brief
>description of the jukebox device? [[email protected]: Standard SCSI Jukebox]
>L_25_1 Pathname of the control port for the jukebox device? [[email protected]]
>Do you want automated device cleaning support enabled? (yes/no) no
>
>Will media drive 1 be shared by multiple device paths? (yes/no) no
>
>Enter hostname that owns media drive 1: ? [dmstore.eyeml.queensu.ca]
>
>An example of a valid device name for this OS is '/dev/rmt/1cbn'
>Enter pathname of media drive 1: ? /dev/rmt/0cbn using '/dev/rmt/0cbn' as
>device name Should the drive be configured as a NDMP device? (yes/no) no
>This media device has not been configured yet.  Please select a media device
>type for /dev/rmt/0cbn.
>  1) 3480                  17) 9490                  33) qic
>
>  2) 3570                  18) 9840                  34) SD3
>
>  3) 3590                  19) 9940                  35) sdlt
>
>  4) 4890                  20) dlt                   36) sdlt320
>
>  5) 4mm                   21) dlt1                  37) SLR
>
>  6) 4mm 12GB              22) dlt7000               38) tkz90
>
>  7) 4mm 20GB              23) dlt8000               39) travan10
>
>  8) 4mm 4GB               24) dst                   40) tz85
>
>  9) 4mm 8GB               25) dst (NT)              41) tz86
>
> 10) 8mm                   26) dtf                   42) tz87
>
> 11) 8mm 20GB              27) dtf2                  43) tz88
>
> 12) 8mm 5GB               28) file                  44) tz89
>
> 13) 8mm AIT               29) himt                  45) tz90
>
> 14) 8mm AIT-2             30) LTO Ultrium           46) tzs20
>
> 15) 8mm AIT-3             31) LTO Ultrium-2         47) VXA
>
> 16) 8mm Mammoth-2         32) optical
>Choice? 36
>Your jukebox has a bar code reader.
>Do you want bar code reader support enabled? (yes/no) yes Do you want volume
>labels to match bar code labels? (yes/no) yes
>
>'read_elem_unload_fail' invalid choice for 'jukebox features'
>Would you like to configure another jukebox? (yes/no)
>
>Any other ideas?
>
>
>-----Original Message-----
>From: Dale Mayes [mailto:dmayes AT kimball DOT com]
>Sent: Wednesday, September 01, 2004 3:39 PM
>To: Ray Pengelly
>Subject: RE: [Networker] jbconfig read_elem_unload_fail
>
>Ray,
>
>Did you delete the jukebox and device entries from within NetWorker?
>
>You'll need to do that before you can "jbconfig" the jukebox again.
>
>HTH...Dale
>
>-----Original Message-----
>From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
>On Behalf Of Ray Pengelly
>Sent: Wednesday, September 01, 2004 2:35 PM
>To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
>Subject: [Networker] jbconfig read_elem_unload_fail
>
>Hello,
>
>
>
>I recently installed some patches on my networker server and it changed
>the
>controller numbers on my scsi controllers. Now of course nothing works.
>I
>uninstalled my jukebox and when I use jbconfig to add it I get a
>"read_elem_unload_fail" invalid choice for 'jukebox features".
>
>
>
>Any ideas?
>
>
>
>Ray
>
>
>
>Ray Pengelly
>
>Computing Technologist
>
>CIHR Group In Sensory-Motor Systems
>
>Queen's University
>
>613-533-6000 x74139
>
>ray AT biomed.queensu DOT ca
>
>
>
>"Wouldn't it be great if life were like windows where you could hit
>ctrl-alt-delete and start over when things go wrong?" - Anonymous
>
>
>
>"How about life being like Unix where they don't mess up in the first
>place"
>- Ray
>
>
>
>
>--
>Note: To sign off this list, send a "signoff networker" command via
>email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>--
>Note: To sign off this list, send a "signoff networker" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=