Hi Robert,
The problem has been solved after reconfiguring DLT drive. Now tapes are
filling upto full capacity(around 60GB).
Thanks,
Srinivas.
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]On Behalf Of Robert Maiello
Sent: 2004 Aug 31 11:23 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Tapes ending prematurely...
I think your first default block size is fine; there should be no need
to set it with NSR_DEVICE_BUFFER_SIZE. The default is 131072, you can do
a scanner -nv on the tape and it will report this. The GUI reports this
as 128K.
Are ALL your tapes filling prematurely? It could very well be a bad tape
or bad drive.
Robert Maiello
Pioneer Data Systems
On Tue, 31 Aug 2004 10:45:43 +0530, Srinivas Rao
<rsrini AT BLR.PIN.PHILIPS DOT COM> wrote:
>Hi All,
>I am using Legato Networker 6.1.4 Build.562 on Solaris system with Sun DLT
>drive. DLT Tapes of 40/80GB are ending prematurely at around 3.5GB with the
>following error.
>
>media notice: Volume "ABJ243" on device "/dev/rmt/0cbn": Block size is
32768
>bytes not 131072 bytes. Verify the device configuration. Tape positioning
by
>record is disabled.
>media notice: "/dev/rmt/0cbn" reading: fsr 1836: read I/O error.
>media emergency: could not position ABJ243 to file 17, record 1838
>media warning: /dev/rmt/0cbn reading: I/O error.
>media warning: /dev/rmt/0cbn reading: I/O error.
>media warning: /dev/rmt/0cbn reading: I/O error.
>media warning: /dev/rmt/0cbn reading: I/O error.
>media warning: verification of volume "ABJ243" , volid 868048897 failed,
>cannot read record 1838 of file 17 on dlt7000 tape ABJ243.
>media notice: verification of volume "ABJ243" , volid 868048897 failed,
>volume is being marked as full.
>
>The current volume block size of the device is 128KB. I have changed
>NSR_DEVICE_BUFFER_SIZE to 131071, 163840 and 196608. Each time after
>changing buffer size, the first tape is getting backedup fine(upto 55GB)
but
>the second tape ends prematurely at around 3.5GB with the above error.
>
>Please let me know about this error and workaround as I am new to Legato.
>
>
>Thanks,
>Srini.
>
>--
>Note: To sign off this list, send a "signoff networker" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|