Don't use the "-v" and you won't see the message.

Honestly, if it's working properly, why does it matter if networker
wants to grab the robot arm to make sure nothing else is using it while
it is dealing with tapes?  It's the way it was coded and probably for a
very good reason.

Dan
 

> -----Original Message-----
> From: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] On Behalf Of 
> Lenderman, Mark E WRAMC WASH DC
> Sent: Friday, May 14, 2004 2:15 PM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker]
> 
> dmss-prd:/var/adm/syslog # nsrjb -I -S 10 -f /dev/rmt/ait1nb 
> -pv setting verbosity level to `1'
> Jukebox handle being opened at port [email protected] About to 
> acquire Robot arm lock
> box_inventory:
> Jukebox handle being closed at port [email protected] About to 
> release Robot arm lock
> 
> Here, you see I ran the nsrjb command to inventory a tape and 
> it just goes into all that acquire and release robot crap. 
> What's going on. The robot is not moving.
> 
> Thanks
> 
> -----Original Message-----
> From: Legato NetWorker discussion
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]On Behalf Of f_x
> Sent: Friday, May 14, 2004 3:14 PM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker]
> 
> 
> Lenderman, Mark E WRAMC WASH DC schrieb:
> > Can anyone tell me why I keep getting this message - before my head 
> > explodes.  Thanks!
> 
> Where is the problem? 3 drives with no errors.
> 
> >
> > dmss-prd:/var/adm/syslog # nsrjb -HEv
> > setting verbosity level to `1'
> > hardware_reset:
> > Jukebox handle being opened at port [email protected] About to acquire 
> > Robot arm lock
> > hardware_reset:
> > Jukebox handle being closed at port [email protected] About to release 
> > Robot arm lock Jukebox handle being opened at port 
> [email protected] About 
> > to acquire Robot arm lock
> > box_inventory:
> > Jukebox handle being closed at port [email protected] About to release 
> > Robot arm lock
> > box_inventory_free:
> > Jukebox handle being opened at port [email protected] About to acquire 
> > Robot arm lock
> > box_comp_status():
> > box_comp_status_free():
> > box_comp_status():
> > box_comp_status_free():
> > box_comp_status():
> > box_comp_status_free():
> > box_comp_status():
> > box_comp_status_free():
> > Jukebox handle being closed at port [email protected] About to release 
> > Robot arm lock
> > box_display: `' for drive `/dev/rmt/ait1nb'
> > box_display: `' for drive `/dev/rmt/ait2nb'
> > box_display: `' for drive `/dev/rmt/ait3nb'
> >
> > --
> > Note: To sign off this list, send a "signoff networker" command via 
> > email to listserv AT listmail.temple DOT edu or visit the list's 
> Web site at 
> > http://listmail.temple.edu/archives/networker.html where 
> you can also 
> > view and post messages to the list.
> > =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> >
> 
> --
> Note: To sign off this list, send a "signoff networker" 
> command via email to listserv AT listmail.temple DOT edu or visit 
> the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you 
> can also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> --
> Note: To sign off this list, send a "signoff networker" 
> command via email to listserv AT listmail.temple DOT edu or visit 
> the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you 
> can also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> 

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=