Re: [Networker] Replaced AIT-II drive, now Networker won't mount
2004-05-04 20:21:17
I believe you answered your own question.
"Werth, Dave" wrote:
>
> Setup:
> Networker 1.6.3 on W2K
> Spectralogic 10000 (Bullfrog) with 2 AIT-II tape drives
>
> Today we replaced one of the AIT-II tape drives in our Bullfrog. Now
> Networker won't mount tapes in either of the drives. We get the following
> message:
>
> \\.\Tape0 <\\.\Tape0> read open error: No media in drive.
>
> Well, when I try to mount it (from Networker) the jukebox does put the tape
> into the drive but it's never being read. This is the case with both the
> drive I replaced today on the one that wasn't replaced.
>
> Windows apparently sees the drive ok as it says the device is working
> properly.
>
> I suppose the answer is to delete and re-add the jukebox but I thought I'd
> see if someone out there had any insight first.
>
> Thanks,
> Dave
>
> David Werth
> Garmin AT, Inc
> (formerly: UPS Aviation Technologies)
> (formerly: II Morrow)
> Salem, Oregon
> dave.werth AT garmin DOT com
>
> -------------------------
> This e-mail and any attachments may contain confidential material for the
> sole use of the intended recipient. If you are not the intended recipient,
> please be aware that any disclosure, copying, distribution or use of this
> e-mail or any attachment is prohibited. If you have received this e-mail in
> error, please contact the sender and delete all copies.
> Thank you for your cooperation
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> ------------------------------------------------------------------------
>
--
----
Corey Hart
Systems/Security Analyst
St. Edward's University
coreyh AT admin.stedwards DOT edu
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
Previous by Date: |
[Networker] Replaced AIT-II drive, now Networker won't mount, Werth, Dave |
Next by Date: |
Re: [Networker] Replaced AIT-II drive, now Networker won't mount, Stan Horwitz |
Previous by Thread: |
[Networker] Replaced AIT-II drive, now Networker won't mount, Werth, Dave |
Next by Thread: |
Re: [Networker] Replaced AIT-II drive, now Networker won't mount, Yura Pismerov |
Indexes: |
[Date]
[Thread]
[Top]
[All Lists] |
|
|