Michael,
To the best of my knowledge Networker 6 and up will not allow or worse,
not work properly, with indexes on NFS.
Please double check if your indexes get updated during the backup and
then saved to tape.
Also please remember that symbolic links are backed up as links so
normally Networker will not follow links to your linked
directory/filesystem.
Itzik

> -----Original Message-----
> From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] On Behalf Of David
> Callaway
> Sent: Tuesday, May 04, 2004 00:24
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] Client indexes not created on disk
> 
> Thanks for the response.  I believe I do have space.  I have 14 gb
> available on an nfs mounted drive.  However, I did change the location
> of the indexes from a local drive to the nfs mounted drive.  Went
> through the disaster recovery steps mmrecov and nsrck -L7 to retrieve
> the data and then made a symlink to the new directory.
> 
> -----Original Message-----
> From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
> On Behalf Of Curran, Michael
> Sent: Monday, May 03, 2004 1:58 PM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] Client indexes not created on disk
> 
> Check the drive where the indexex go ....got space?
> 
> -----Original Message-----
> From: David Callaway [mailto:drcallaway AT UCDAVIS DOT EDU]
> Sent: Monday, May 03, 2004 3:49 PM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Client indexes not created on disk
> 
> Networker 6.1.1 on Solaris 7
> 
> I run a savegrp groupname with the -v switch and all files in the
group
> are
> backed up to tape.  However, while watching the console I see that at
> the
> end of each save set I get a
> 
> save: SYSTEM error: Not enough space
> 
> and then it moves on to the next save set.
> 
> The save sets are on the tapes but the indexes in /nsr/index/hostname
> are
> empty.
> 
> Anyone see anything like this?  I'm about ready to purchase some
> support.
> 
> thanks in advance
> 
> David
> SSDS
> 530.754.8070
> 
> --
> Note: To sign off this list, send a "signoff networker" command via
> email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> --
> Note: To sign off this list, send a "signoff networker" command via
> email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> --
> Note: To sign off this list, send a "signoff networker" command via
email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=


**************************************************************************************************
The contents of this email and any attachments are confidential.
It is intended for the named recipient(s) only.
If you have received this email in error please notify the system manager or  
the 
sender immediately and do not disclose the contents to any one or make copies.

MBI - System Team
**************************************************************************************************

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=