I have been working with legato on this problem since the upgrade....

04/02/04 11:06:55 nsrd: media notice: Volume "L00415" on device
"/dev/rmt/5cbn": Block size is 32768 bytes not 65536 bytes. Verify the
device configuration. Tape positioning by record is disabled.

I have solaris 9, and LTO 1 tapes.  

Other than that the upgrade went real well and real fast.

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Erin S. Voss
Sent: Wednesday, April 07, 2004 4:00 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] upgrade 6.0.1 -> 7.0

We are going to be upgrading our Networker (Sun-flavored, "Enterprise
Backup
Solution") installation from 6.0.1 to 7.0 next week.  Our server is
running
Solaris 8, and we've already got the auth code for the upgrade license.

The documentation provided by Sun makes it seem like the upgrade
is very straightforward.
1) back up your backup server and write down important info (like
bootstrap locations)
2) remove the old software package
3) install the new package
4) allow resource files to be converted

If others have done similar upgrades, are there other things you would
recommend doing?  Any problems you encountered?

Any advice would be appreciated.

Thanks,
Erin

--
Erin S. Voss
Systems Support Specialist
Information Services
Bryn Mawr College

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=