When something similar happened to us, it turned out to be a library
problem. The L-20 in particular will take the library off-line if there's a
tape inserted the wrong way in the CAP. Make sure the library display is
not showing any errors and if it's okay have StorageTek check it out.

Conrad Macina
Pfizer, Inc.



On Tue, 16 Mar 2004 14:56:52 -0500, Novello, Guy <GNovello AT PHCS DOT COM> 
wrote:

>Greetings,
>
>I have a question that I hope you folks can help with.
>
>I have a networker data zone with an AIX server, One AIX storage node and
One windows stroage node.
>They all share a silo. I am trying to add a new windows storage node with
a local auto changer.
>The new storage node can talk with the server and the server can see the
new drive (DLT8000).
>
>The problem is that I cannot configure the auto changer. The inquire
command sees both the drive and the autochanger.
>When I run the jbconfig command, it gets to the end and says it can't talk
to the controller port and I must
>have a bad driver. We already reloaded the driver so I am thinking it may
be a permissions issue. The windows
>machine says the driver and device are fine.
>
>Any ideas?
>
>Thanks in advance.
>
>Guy Novello
>Private HealthCare Systems
>781-895-3117
>
>--
>Note: To sign off this list, send a "signoff networker" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=