In regard to: [Networker] Missing autochanger (Linux AS2.1), Brian O'Neill...:

>And after the inquire, and the scsi-generic module is loaded, I get the
>following:
>
>Attached scsi generic sg1 at scsi0, channel 4, id 6, lun 0,  type 3
>Attached scsi generic sg2 at scsi0, channel 5, id 0, lun 0,  type 8

"type 8" means Medium Changer, so there's your jukebox.
"type 3" is a "Processor Device", which may not respond to much.

>sg1 seems to be associating itself with the 1x3 SCSI BP device, but
>inquire isn't giving any info on it.

I recommend you get the sg3_utils tarball and build it, and use the
sg_inquire in there to try device inquiry.  It may well give you a
clue about what the problem could be.

Tim
--
Tim Mooney                              mooney AT dogbert.cc.ndsu.NoDak DOT edu
Information Technology Services         (701) 231-1076 (Voice)
Room 242-J6, IACC Building              (701) 231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=