As an experiment you could switch off CDI support at the device level in the
GUI : MEDIA -> DEVICES -> (DEVICE) -> CDI = not used

some problems on my drives went away after not using the new scsi interface
(CDI) anymore in 7.0.

it seems that the new messages coming back from the new device drivers (by
legato) confused legato neworkers behaviour.

just a suggestion, maarten

On Friday 05 March 2004 23:18, you wrote:
> Have you tried killing the nsrmmd.exe process alone to see if this
> resolves the issue?  Better than a reboot or stopping the group.  The
> nsrmmd.exe will restart.
>
> Carter Fowler
> Hardware Services Technician
> Technology Services Division
> Off: 519.661.5711
> Fax: 519.661.5408
> Em: cfowler AT london DOT ca
>
> -----Original Message-----
> From: Evan Gold [mailto:egold AT FSA DOT COM]
> Sent: March 5, 2004 9:03 AM
> To: NETWORKER AT listmail.temple DOT edu
> Subject: Re: Cloning
>
> I also run win2000 and legato 7.1.1
> This sometimes happens to me too with both clones and backups too.
> In the group control window I see a "clock" icon or "cloning" icon next
> to the group but no data is being written to the tapes
> The system is just doing nothing. There are plenty of blank tapes and
> available tape drives.
> I've never solved it, I usually have to stop the group or reboot the
> server to fix and I lose my clones
> I then rerun and its fine
>
> I have to open a case with legato on this.
> Let me know if u solve it.
>
> Regards
> Evan
>
> --------------------------
> Sent from my BlackBerry Wireless Handheld
>
>
>
> ----- Original Message -----
> From: Legato NetWorker discussion [NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
> Sent: 03/05/2004 08:10 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Cloning
>
> Networker 7.1, Windows 2000
>
> OK! I need some real help here with Cloning.  My Clone Sets NEVER
> complete.  Every morning when I come in the cloning sessions are still
> running and when I look at the status they are "writing, idle" and
> "reading, done".  When I look at the perfmon counters for "Write
> kilobyte / sec" there is no activity whatsoever.  How can I make sure
> that my clones continue to run as scheduled?  AND if they are hung how
> can I nudge them along?  Any help would be greatly appreciated!
>
>
> Thanks,
> Brian
> --
> Note: To sign off this list, send a "signoff networker" command via
> email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff networker" command via
> email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=