On Solaris you use lputil. In windows you use elxcfg.exe.
Itzik
> -----Original Message-----
> From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] On Behalf Of Evan Gold
> Sent: Tuesday, February 24, 2004 22:47
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] legato tape drive ordering with fiber drives
thru a brocade switch?
>
> thanks ill try it.
> what command in solaris did u use to do this?
>
> Evan
>
>
>
> Jon Hickmott
> <jonny AT UWO DOT CA>
> Sent by: Legato
To
> NetWorker NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> discussion
cc
> <NETWORKER@LISTMA
> IL.TEMPLE.EDU>
Subject
> Re: [Networker] legato tape
drive
> ordering with fiber drives thru
a
> 02/24/2004 02:14 brocade switch?
> PM
>
>
> Please respond to
> Legato NetWorker
> discussion
> <NETWORKER@LISTMA
> IL.TEMPLE.EDU>;
> Please respond to
> Jon Hickmott
> <jonny AT UWO DOT CA>
>
>
>
>
>
>
> Our environment is close to this except we have a solaris 9 box as our
> server. To get
> around the tape drive order issue we statically maped the tape drives
> to the server by
> WWNN. This is done in the configuration of the HBA in the solaris
> server. Depending
> on the HBA you use in your Windows server you may have the option to
do
> this same
> kind of static mapping. Not all HBAs have this ability.
>
> Good Luck
> Jon
>
> Unix/DB admin - University of Western Ontario.
>
> Evan Gold wrote:
>
> >I run legato 7.1.1 on win2000
> >i have a storagetek l180 library with 6 fiber hp lto2 tape drives
> >the drives are connected thru 2 brocade switches
> >the switches have NO zones setup and all ports can see all other
ports
> >
> >i am trying to re-cable the fiber drives so that the "inquire" output
> >matches the "sjisn 2.0.0" output.
> >I dont know if im missing something, but no matter which ports i put
which
> >drives into on the brocade, i cannot get the real tape0 to become the
> >virtual tape0 with the above commands. with old scsi drives this was
easy,
> >but with the fiber drives i cant get it to work.
> >
> >has anyone seen this issue and fixed it?
> >
> >my work around is to enter the drives into "jbconfig" in the order
that
> >"sjisn 2.0.0" told me to, so now when you look at the library in
legato,
> >the drives are not in order, but i really want them to be in the real
> >order.
> >
> >thank you in advance.
> >
> >
> >
> >here is my inquire and sjisn outputs (note: i have unplugged the 2nd
hba
> >for troubleshooting)
> >
> >C:\Documents and Settings\Administrator>sjisn 2.0.0
> >Serial Number data for 2.0.0 (STK L180 ):
> > Library:
> > Serial Number: MPC02209470
> > Drive at element address 500:
> > SCSI-3 Device Identifiers:
> > VENN:HUM3G00040
> > Drive at element address 501:
> > SCSI-3 Device Identifiers:
> > VENN:HUM3G00050
> > Drive at element address 502:
> > SCSI-3 Device Identifiers:
> > VENN:HUM3G00246
> > Drive at element address 503:
> > SCSI-3 Device Identifiers:
> > VENN:HUM3G00255
> > Drive at element address 504:
> > SCSI-3 Device Identifiers:
> > VENN:HUM3G00046
> > Drive at element address 505:
> > SCSI-3 Device Identifiers:
> > VENN:HUM3G00349
> >
> >C:\Documents and Settings\Administrator>
> >
> >
> >C:\Documents and Settings\Administrator>inquire
> >[email protected]:TEAC CD-224E 9.9A|CD-ROM
> >[email protected]:STK L180 0306|Autochanger (Jukebox),
> >\\.\Changer0
> > S/N: MPC02209470
> >[email protected]:COMPAQ SCSI COMMUNICATECISS|Unknown Device Type
> >[email protected]:COMPAQ LOGICAL VOLUME 2.56|Disk, \\.\PHYSICALDRIVE0
> >
> >WWNN:600508B1001841385850494356340002
> >
> >[email protected]:COMPAQ LOGICAL VOLUME 2.56|Disk, \\.\PHYSICALDRIVE1
> >
> >WWNN:600508B1001841385850494356340003
> >
> >[email protected]:HP Ultrium 2-SCSI K342|Tape
> > S/N: HUM3G00050
> > ATNN:HP Ultrium
2-SCSI
> >HUM3G000
> >50
> > WWNN:50060B00001E6372
> >[email protected]:HP Ultrium 2-SCSI K342|Tape
> > S/N: HUM3G00040
> > ATNN:HP Ultrium
2-SCSI
> >HUM3G000
> >40
> > WWNN:50060B00001E634A
> >[email protected]:HP Ultrium 2-SCSI K342|Tape, \\.\Tape0
> > S/N: HUM3G00246
> > ATNN:HP Ultrium
2-SCSI
> >HUM3G002
> >46
> > WWNN:50060B00001E6682
> >[email protected]:Emulex Utility Ifc Dev.EMU2|(Unknown Device Type b)
> >[email protected]:Emulex Utility Ifc Dev.EMU2|(Unknown Device Type b)
> >
> >C:\Documents and Settings\Administrator>
> >
> >--
> >Note: To sign off this list, send a "signoff networker" command via
email
> >to listserv AT listmail.temple DOT edu or visit the list's Web site at
> >http://listmail.temple.edu/archives/networker.html where you can
> >also view and post messages to the list.
> >=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> >
> >
>
> --
> Note: To sign off this list, send a "signoff networker" command via
email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff networker" command via
email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
**************************************************************************************************
The contents of this email and any attachments are confidential.
It is intended for the named recipient(s) only.
If you have received this email in error please notify the system manager or
the
sender immediately and do not disclose the contents to any one or make copies.
MBI - System Team
**************************************************************************************************
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
