Thank you Anuj.  I will check the properties on my Groups. 


Thanks,
Brian 

-----Original Message-----
From: Anuj Mediratta [mailto:anuj AT ACE-DATA DOT NET] 
Sent: Tuesday, February 24, 2004 2:02 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Tape utilization

Hi Brian,

If you have 4 groups to run simultaneously, you can select a specific
drive for each group while configuring the group properties.

Regards,
Anuj

On Tue, 24 Feb 2004 11:32:35 -0500, "Spindler, Brian"
<John.Spindler AT RUESCH DOT COM> wrote :

> Legato 7.1
>
> I have 4 tape drives and 9 times out of 10 only two of them are being 
> utilized.  How can I make it so that all four will be used during 
> backups? Or how can I just make sure that whatever job it's doing only

> needs two drives?
>
>
> Thanks,
> Brian
>
> -----Original Message-----
> From: Dan Tulovsky [mailto:dtulovsky AT sbigroup DOT com]
> Sent: Tuesday, February 24, 2004 11:07 AM
> To: Legato NetWorker discussion; Spindler, Brian
> Subject: RE: [Networker] Unload retry
>
> I get this once in a while too.  If it eventually manages to unload 
> the tape, then it's ok.  It means networker is waiting for the tape
drive...
> If it gets stuck, it might be a hardware issue.
>
> Dan
>
>
> -----Original Message-----
> From: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
> On Behalf Of Spindler, Brian
> Sent: Tuesday, February 24, 2004 10:44 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Unload retry
>
> Hi guys/gals,
>   I keep getting this message (Legato 7.1):
> NetWorker media: (info) unload retry for jukebox `QualStar8466' failed

> - will retry again.
>
> I am very new to Legato, how can I fix this?
>
>
> Thanks,
> Brian
> --
> Note: To sign off this list, send a "signoff networker" command via 
> email to listserv AT listmail.temple DOT edu or visit the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you can also 
> view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff networker" command via 
> email to listserv AT listmail.temple DOT edu or visit the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you can also 
> view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
>

--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=