Re: [Networker] Linux, DLT8000 and stinit again...
2004-02-08 17:57:32
Hi,
I'm no stinit.def whiz but you're specifying compression and then
specifying the uncompressed density code of 88. Try changing the density
setting to compressed: 0x89.
You will also need to "reformat" the media by using tar or dd to
overwrite the header of the tape: dd if=/usr/bin of=/dev/nst0
Once you've done this try relabelling with Networker again & see how you
get on.
Cheers,
John
> Current settings are:
>
> manufacturer=TANDBERG model="DLT8000" {
> buffer-writes read-ahead async-writes
> can-bsr compression scsi2logical drive-buffering
> timeout=9600
> long-timeout=14400
> # mode1 blocksize=0 density=0x41
> mode1 blocksize=0 density=0x88
> # compression=0
> buffering=1 async-writes=1 read-ahead=1
> }
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|