Hello Debra:
I also did a few upgrades from 4.0F and 4.0G to 5.1b but did not have to
re-install Networker. I may be wrong, but I think that this has nothing
to do with the upgrade.
>From the behaviour of Networker that I have observed in the past, the
problem you are describing would appear to indicate one (or more) of the
following reasons:
- Network interface problem (Bad card, misconfigured NIC.)
- Bad network cable and/or connectors.
- Bad port on the switch or defective switch.
In most cases, replacing the NIC solved the losing of connection issues.
Hope this will give you a clue to what is happening.
Best whishes,
Serge
On Wed, 28 Jan 2004 10:24:17 +1000, NEWHAM Debra
<DNEWHAM AT GOLDCOAST.QLD.GOV DOT AU> wrote:
>Hi all
>After upgrading the unix client (uxfmistst) from Tru64 v5.1a PK3
>to Tru64 v5.1b PK3 we have received the error below during all
>attempted backups.
>
>The Networker client software was re-installed after the o/s upgrade.
>
>The two directories which continually fail contain large amounts
>of oracle data (~100GB each), however this amount of data has
>been successfully backed up under the current set up for over
>a year before the o/s upgrade of the client. (we do shutdown
>the Application and oracle database before the backup)
>
>
>NetWorker savegroup: (alert) Unix3 completed, total 1 client(s), 0
Hostname(s) Unresolved, 1 Failed, 0 Succeeded. (uxfmistst Failed)
>Start time: Tue Jan 27 18:40:01 2004
>End time: Wed Jan 28 00:53:17 2004
>--- Unsuccessful Save Sets ---
>* uxfmistst:/ora_dev/ADEV 2 retries attempted
>* uxfmistst:/ora_dev/ADEV lost connection to server, exiting
>* uxfmistst:/ora_tst/ATST 2 retries attempted
>* uxfmistst:/ora_tst/ATST lost connection to server, exiting
>--- Successful Save Sets ---
>* uxfmistst:/ora_redo 2 retries attempted
>uxfmistst: /ora_redo level=full, 1564 MB 00:13:48 421 files
>uxfmistst: /ora_dev/edev level=full, 12 GB 01:49:21 67417 files
>uxfmistst: /ora_old level=full, 4226 MB 00:31:35 126764 files
>uxfmistst: /ora_share level=full, 10 GB 01:19:59 189527 files
>uxfmistst: / level=full, 145 MB 00:01:00 2704 files
>uxfmistst: /usr level=full, 2620 MB 00:21:33 51635 files
>uxfmistst: /var level=full, 651 MB 00:08:15 5890 files
>uxfmistst: /opt level=full, 13 GB 01:35:01 55536 files
>* uxfmistst:/ora_trn/oracle/product/8.1.7 1 retry attempted
>uxfmistst: /ora_trn/oracle/product/8.1.7 level=full, 1307 MB 00:13:42
49575 files
>uxfmistst: /ora_trn/oracle/product/jre level=full, 5054 KB 00:03:02 52
files
>* uxfmistst:/ora_tst/etst 1 retry attempted
>uxfmistst: /ora_tst/etst level=full, 10 GB 01:09:55 56274 files
>uxfmis1: index:uxfmistst level=full, 471 MB 00:01:49 60 files
>
>Has anyone seen or heard of this problem??
>
>thanks in advance for your help
>
>Below are some details about our environment.
>
>
>Regards
>
>Ruth Reeve
>
>Unix System Administrator
>Information Services
>Gold Coast City Council
>W: (07) 5581 6955
>M: 0414 180 908
>
>
>
>
>
>Legato Networker Server v7.0.Build.322
>(uxfmis1 - ES45 Tru64 v5.1a PK3)
>
>uxfmis1 (root) #> setld -i | grep -i networker | grep -v "not installed"
>LGTOCLNT700 installed Legato Networker Basic Client
>LGTOMAN700 installed Legato Networker Manpages
>LGTONODE700 installed Legato Networker Driver &
Storage Node
>LGTOSERV700 installed Legato Networker Server
>
>
>
>
>
>Legato Networker unix client
>(uxfmistst - DS25 Tru64 v5.1b PK3)
>
>uxfmistst (root) #> setld -i | grep -i networker | grep -v "not installed"
>LGTOCLNT700 installed Legato Networker Basic
Client
>LGTOMAN700 installed Legato Networker Manpages
>
>
>
>uxfmistst (root) #> hwmgr get att -cat network -a name -a model -a
MTU_size -a media_speed -a full_duplex
>24:
> name = ee0
> model = Intel 8255x
> MTU_size = 1500
> media_speed = 100
> full_duplex = 1
>42:
> name = bcm0
> model = DEGXA
> MTU_size = 1500
> media_speed = 1000
> full_duplex = 1
>
>uxfmistst (root) #> netstat -p ip
>ip:
> 89092986 total packets received
> 0 bad header checksums
> 0 with size smaller than minimum
> 0 with data size < data length
> 0 with header length < data size
> 0 with data length < header length
> 0 fragments received
> 0 fragments dropped (duplicate or out of space)
> 0 fragments dropped after timeout
> 0 packets forwarded
> 71 packets not forwardable
> 71 link-level broadcasts
> 0 packets denied access
> 0 redirects sent
> 0 packets with unknown or unsupported protocol
> 89092915 packets consumed here
> 284335948 total packets generated here
> 0 lost packets due to resource problems
> 0 total packets reassembled ok
> 0 output packets fragmented ok
> 0 output fragments created
> 0 packets with special flags set
>
>
>uxfmistst (root) #> netstat -ni
>Name Mtu Network Address Ipkts Ierrs Opkts
Oerrs Coll
>bcm0* 1500 <Link> 00:02:a5:c6:29:ed 0 0 0
0 0
>ee0 1500 <Link> 40:00:84:a5:3d:00 44261223 0 229928385
0 0
>ee0 1500 DLI none 44261223 0 229928385
0 0
>ee0 1500 172.16.35/24 172.16.35.22 44261223 0 229928385
0 0
>lo0 4096 <Link> Link#4 54476519 0 54476519
0 0
>lo0 4096 127/8 127.0.0.1 54476519 0 54476519
0 0
>sl0* 296 <Link> Link#3 0 0 0
0 0
>tun0* 1280 <Link> Link#5 0 0 0
0 0
>tun1* 1280 <Link> Link#6 0 0 0
0 0
>
>
>
>uxfmistst (root) #> rpcinfo -p
> program vers proto port
> 100000 2 tcp 111 portmapper
> 100000 2 udp 111 portmapper
> 100011 1 udp 1032 rquotad
> 100068 2 udp 1033 rpc.cmsd
> 100068 3 udp 1033 rpc.cmsd
> 100068 4 udp 1033 rpc.cmsd
> 100083 1 tcp 1026 rpc.ttdbserverd
>1342177279 4 tcp 1050
>1342177279 1 tcp 1050
> 390113 1 tcp 7937 nsrexec
>
>
>
>
>
>**************************************************************************
*******
>This e-mail and its contents is confidential to Gold Coast City Council
>and un-authorised use is strictly prohibited.
>**************************************************************************
*******
>
>
>--
>Note: To sign off this list, send a "signoff networker" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
