Tried this as well but it isn't a valid Windows Network message number.
I had an unknown error 0 once when backing up Exchange. This was a
message telling me everything was finished ok.

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Allan Nelson
Sent: vrijdag 23 januari 2004 14:53
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] unknown error 193

You could try this - not sure if there is an error code 193 and I
haven't got an NT box to try it on...

On the NT box, get a command prompt (DOS box) and type...

net helpmsg 193

Should get more info on what that error is.

For example, you can often see lots of error 32's.  Basically that
means 'the file is open by another process', but it sometimes just gets
logged as (unknown error 32).

Hope this helps - sorry if I'm totally off track... Allan.

>>> catherine.grenet AT UREC.CNRS DOT FR 23/01/04 11:50:04 >>>
The question has been asked on the list before and got no answer :

Networker 6.0.1 on NT Server 4.0 SP6
All partitions on the server plus the client indexes fail with the
following message :
    save: unknown error 193 (0xc1)
Other machines backup normally (except for indexes)

savegrp -v on the command line gives the same result (error 193)

On the other hand, the save command on the server partitions completes
successfully.

Thanks for any idea

--
Catherine Grenet
CNRS/UREC

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=


--
Bell Microproducts Europe BV

This message is intended only for the use of the person(s) (\"the intended 
recipient(s)\") to whom it is addressed.  It may contain information which is 
privileged and confidential within the meaning of applicable law.  If you are 
not the intended recipient, please contact the sender as soon as possible.  The 
views expressed in this communication may not necessarily be the views held by 
Bell Microproducts Europe BV.

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=