Re: [Networker] jbconfig after restart Server
2003-11-13 14:19:49
Have you ensured that your Win2K box has the Removable Storage disabled?
Also, if the drives are plugged into a SAN at some point, any Storage
node attached to the same ZONE that gets rebooted could change the paths
to the devices. SCSI resets...
Good luck,
Carter Fowler
Hardware Service Technician
The City Of London
380 Wellington St. Suite 600
London, ON, CA, N6A 5B5
Off. 519.661.5711
Cel. 519.870.4956
E-mail. cfowler AT london DOT ca
-----Original Message-----
From: Thomas Mawick [mailto:thomas.mawick AT ZEDA DOT DE]
Sent: November 13, 2003 5:53 AM
To: NETWORKER AT listmail.temple DOT edu
Subject: jbconfig after restart Server
Hello,
I have a big problem.
When I restart my Networker Server I have to do a new jbconfig, because
the
Networker loads the tapes in the wrong device.
For exaample:
Networker wrote:
loading tape CWM001 into \\.\Tape0
the Tape will mounted in the \\.\Tape0 from the Storage Node.
After a new jbconfig...all is running and the Networker load the tape in
the right tape.
We use
Networker 6.1.3 on Windows and a ATL P3000 DLT Library
Anybody a idea ???!!!
--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|