Sumash,  Thanks for replying.
 
I have tried not using hostname, using other paths and names, typing the 
correct path for the drive and everything else I can think of.  But I just got 
a response from Legato.  You can NOT get the 7.1 (2003)Storage Node Client to 
communicate properly with a 6.1.3 (2000)Server.  Just won't happen.  Upgrade 
the server to 7.1 was the official response.  I guess I'm going to have to 
upgrade a little sooner than I had planned but it's not the end of the world.  
 
Thank you all for the responses and help, it's greatly appreciated.

Regards,
Phil M.
 
 

        -----Original Message----- 
        From: Sumash Singh [mailto:ssingh AT STORTECH.CO DOT ZA] 
        Sent: Wed 10/22/2003 2:36 AM 
        To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU 
        Cc: 
        Subject: Re: [Networker] Adding Storage Node
        
        

        All righty then,
        
        How about sending the output of the inquire command as well.
        
        
        
        -----Original Message-----
        From: McDougal, Philip H [mailto:PMcDougal AT JENNER DOT COM]
        Sent: 21 October 2003 08:57 PM
        To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
        Subject: Re: [Networker] Adding Storage Node
        
        
        Hello,
        
        I'm having issues installing a remote storage node on a Win2003 client
        (client has 7.1 and server has WIn2000 with  6.1.3 and savegrp patch).
        I've tried disabling and enabling RSM but it doesn't matter, I run
        jbconfig and I get the following message... Inquire shows the changer
        and both drives.  And after this message, the drives are in the Devices
        location but not in the Autochanger.
        
        
        C:\>jbconfig -s chntbkp01
        
        On a storage node, the hostname is a prefix to the jukebox name.
        Enter the hostname to use as a prefix? [chntbkp02]
        using 'chntbkp02' as the hostname prefix
        
                 1) Configure an AlphaStor/SmartMedia Jukebox.
                 2) Configure an Autodetected SCSI Jukebox.
                 3) Configure an Autodetected NDMP SCSI Jukebox.
                 4) Configure an SJI Jukebox.
                 5) Configure an STL Silo.
                 6) Configure a Microsoft Removable Storage Jukebox.
        
        What kind of Jukebox are you configuring? [1] 2
        Installing 'Standard SCSI Jukebox' jukebox -  <mailto:[email protected]>
        [email protected].
        
        What name do you want to assign to this jukebox device? Compaq
        using 'rd=chntbkp02:Compaq' as jukebox device name
        Turn NetWorker auto-cleaning on (yes / no) [yes]? yes
        
        The following drive(s) can be auto-configured in this jukebox:
         1> sdlt @ 2.1.0 ==>  <file://\\.\Tape0> \\.\Tape0
        The 1 drive(s) that cannot be auto-configured will be addressed in a
        moment,
         but first:
        Do you want to configure any of the detected drives as shared or NDMP
        drives or otherwise manually change their configuration? (yes / no) [no]
        no
        
        Please enter the device path information in one of the following
        formats:
        
                 <file://\\.\Tape0> \\.\Tape0 --for local path or
                host:device-path --for remote node or
                host:drive-letter:directory path --for Windows disk file
        
        You will be prompted only for those drives that could not be
        auto-configured;
        the others will be skipped. Please provide the paths for these drives:
        
        Drive  2, element 481
        Drive path ? chntbkp02:\\Tape1
        stat error: device `\\Tape1' does not exist.
        Pathname '\\Tape1' is not valid. Please try again.
        Drive path ? chntbkp02:\\.\Tape1
        
        Only model sdlt drives have been detected.
        Are all drives in this jukebox of the same model?  (yes / no) [yes] yes
        
        A Dedicated Storage Node can backup only local data to its devices.
        Should chntbkp02 be configured as a Dedicated Storage Node? (yes / no)
        [no] no
        
        jbconfig: RAP error: 'read_elem_unload_fail' invalid choice for 'jukebox
        feature
        s'
        
        C:\>
        
        
        Any help or guidance would be appreciated, thank in advance
        
        Phil M..
        
        
        -----Original Message-----
        From: Riaan Louwrens [mailto:riaanl AT SOURCECONSULTING.CO DOT ZA]
        Sent: Tue 10/21/2003 11:54 AM
        To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
        Cc:
        Subject: Re: [Networker] Adding Storage Node
        
        
        
        Hi,
        
        You would have to configure the client in Legato.
        
        Make sure the SCSI is setup 100% on the client (acces to tapes etc).
        
        And then in the client configuration properties you add in the "storage
        node" box its own name.
        
        You would then have to add the device (or library) to Legato in the
        devices
        tab. (rd=).
        
        All pretty wel documented though.
        
        Regards,
        riaan
        
        -----Original Message-----
        From: Ray lee [ mailto:rlee0004 AT TAMPABAY.RR DOT COM]
        Sent: Tuesday, October 21, 2003 6:15 PM
        To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
        Subject: [Networker] Adding Storage Node
        
        
        We are adding a new StorageNode/Client to our current setup. What are
        the
        correct steps in adding a new SN/Client into Legato?
        
        --
        Note: To sign off this list, send a "signoff networker" command via
        email
        to listserv AT listmail.temple DOT edu or visit the list's Web site at
        http://listmail.temple.edu/archives/networker.html where you can
        also view and post messages to the list.
        =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
        
        --
        Note: To sign off this list, send a "signoff networker" command via
        email
        to listserv AT listmail.temple DOT edu or visit the list's Web site at
        http://listmail.temple.edu/archives/networker.html where you can
        also view and post messages to the list.
        =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=