Networker

Re: [Networker] Adding Storage Node

2003-10-22 03:38:24
Subject: Re: [Networker] Adding Storage Node
From: Sumash Singh <ssingh AT STORTECH.CO DOT ZA>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Wed, 22 Oct 2003 09:36:15 +0200
All righty then,

How about sending the output of the inquire command as well.



-----Original Message-----
From: McDougal, Philip H [mailto:PMcDougal AT JENNER DOT COM]
Sent: 21 October 2003 08:57 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Adding Storage Node


Hello,
 
I'm having issues installing a remote storage node on a Win2003 client
(client has 7.1 and server has WIn2000 with  6.1.3 and savegrp patch).
I've tried disabling and enabling RSM but it doesn't matter, I run
jbconfig and I get the following message... Inquire shows the changer
and both drives.  And after this message, the drives are in the Devices
location but not in the Autochanger.
 
 
C:\>jbconfig -s chntbkp01
 
On a storage node, the hostname is a prefix to the jukebox name.
Enter the hostname to use as a prefix? [chntbkp02]
using 'chntbkp02' as the hostname prefix
 
         1) Configure an AlphaStor/SmartMedia Jukebox.
         2) Configure an Autodetected SCSI Jukebox.
         3) Configure an Autodetected NDMP SCSI Jukebox.
         4) Configure an SJI Jukebox.
         5) Configure an STL Silo.
         6) Configure a Microsoft Removable Storage Jukebox.
 
What kind of Jukebox are you configuring? [1] 2
Installing 'Standard SCSI Jukebox' jukebox -  <mailto:[email protected]>
[email protected].
 
What name do you want to assign to this jukebox device? Compaq
using 'rd=chntbkp02:Compaq' as jukebox device name
Turn NetWorker auto-cleaning on (yes / no) [yes]? yes
 
The following drive(s) can be auto-configured in this jukebox:
 1> sdlt @ 2.1.0 ==>  <file://\\.\Tape0> \\.\Tape0
The 1 drive(s) that cannot be auto-configured will be addressed in a
moment,
 but first:
Do you want to configure any of the detected drives as shared or NDMP
drives or otherwise manually change their configuration? (yes / no) [no]
no
 
Please enter the device path information in one of the following
formats:
 
         <file://\\.\Tape0> \\.\Tape0 --for local path or
        host:device-path --for remote node or
        host:drive-letter:directory path --for Windows disk file
 
You will be prompted only for those drives that could not be
auto-configured;
the others will be skipped. Please provide the paths for these drives:
 
Drive  2, element 481
Drive path ? chntbkp02:\\Tape1
stat error: device `\\Tape1' does not exist.
Pathname '\\Tape1' is not valid. Please try again.
Drive path ? chntbkp02:\\.\Tape1
 
Only model sdlt drives have been detected.
Are all drives in this jukebox of the same model?  (yes / no) [yes] yes
 
A Dedicated Storage Node can backup only local data to its devices.
Should chntbkp02 be configured as a Dedicated Storage Node? (yes / no)
[no] no
 
jbconfig: RAP error: 'read_elem_unload_fail' invalid choice for 'jukebox
feature
s'
 
C:\>

 
Any help or guidance would be appreciated, thank in advance 
 
Phil M..
 

-----Original Message----- 
From: Riaan Louwrens [mailto:riaanl AT SOURCECONSULTING.CO DOT ZA] 
Sent: Tue 10/21/2003 11:54 AM 
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU 
Cc: 
Subject: Re: [Networker] Adding Storage Node



Hi,

You would have to configure the client in Legato.

Make sure the SCSI is setup 100% on the client (acces to tapes etc).

And then in the client configuration properties you add in the "storage
node" box its own name.

You would then have to add the device (or library) to Legato in the
devices
tab. (rd=).

All pretty wel documented though.

Regards,
riaan

-----Original Message-----
From: Ray lee [ mailto:rlee0004 AT TAMPABAY.RR DOT COM]
Sent: Tuesday, October 21, 2003 6:15 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Adding Storage Node


We are adding a new StorageNode/Client to our current setup. What are
the
correct steps in adding a new SN/Client into Legato?

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=


<Prev in Thread] Current Thread [Next in Thread>