Hi,
Unfortuantely, I am aware of this.
It just doesnt make sense that you can "work" with the virtual server from
all other aspects (applications, ping, nslookup, various OS's etc) but
Legato cannot "see it". We are trying now to bring up all of the normal
"non-required" NLM's in an attempt to get Legato to communicate (i.e.
RCMDSRV) with Netware.
Will keep "plowing" ahead ...
;p
Riaan
-----Original Message-----
From: Chezy Gal [mailto:Chezy AT tauex.tau.ac DOT il]
Sent: Monday, September 22, 2003 8:37 AM
To: Legato NetWorker discussion; Riaan Louwrens
Subject: RE: [Networker] Netware 6.5 Clustered Backup Problem
Hi,
This path is already been plowed in the past with NW 6.0 cluster.
Legato's Networker is not Netware Cluster aware. You must user server
physical name.
Chezy Gal
> -----Original Message-----
> From: Riaan Louwrens [mailto:riaanl AT SOURCECONSULTING.CO DOT ZA]
> Sent: Monday, September 22, 2003 9:37 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] Netware 6.5 Clustered Backup Problem
>
> Hi There,
>
> From your email I gather you havent had any success either ?
>
> Netware 6.5 uses TSAFS. By playing around with the /nocluster
> switch we have
> been able to backup the cluster resource as part of the
> physical machine ...
> (weve tried TSA600 as well) ...
>
> Were trying (in vain so far) to get the virtual machine backed up ...
>
> So Im still waiting (hoping) for positive feedback from the list.
>
> I wonder if there is a novell mail list ....?
>
> Regards,
>
> Riaan
> -----Original Message-----
> From: Ryan Tassotti [mailto:LSS5 AT BRISBANE.QLD.GOV DOT AU]
> Sent: Monday, September 22, 2003 12:08 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] Netware 6.5 Clustered Backup Problem
>
>
> Morning Riaan,
>
> You have SMDR and TSANDS listed, but what about TSA600?
>
> Also, with our Netware 6 cluster, we have been unable to
> backup the cluster
> resources, instead having to backup the physical volumes on each node.
> Which kind of defeats the purpose of a cluster :-)
>
> Regards,
> Ryan.
>
>
> >>> riaanl AT SOURCECONSULTING.CO DOT ZA 09/18/03 10:52pm >>>
> Hi There,
>
> Trying a "new" test. You must please forgive me as im not to
> Netware aware
> ... (pun intended).
>
> Running Netware 6.5 on 2x HP DL380's
> Netware Cluster up and running (resources fail over 100%).
> Straigh SCSI disk.
>
> Installed Networker for Netware 4.21 on both nodes.
>
> Win2000 SP3 Backup Server - NW 6.1.3
>
> Networker added as a cluster resource with the correct
> scripts to start and
> stop the Networker services correctly. This works 100% and
> when the cluster
> fails over Networker shuts down and starts up on the other
> node without a
> hitch.
>
> SMS loads before Networker
> TSANDS loads before Networker
>
> I am running eval so I havrnt loaded any clientpacks etc.
>
> I have created the virtual node
> I have created the physical node
>
> I can backup the physical 1 node's NDS and SYS without a
> problem (using
> correct account and pwd).
>
> I cannot see the shared storage when I probe the physical 1 client.
>
> I cannot connect to the virtual machine - even when specifying correct
> account and passwords
> (error: Cannot make TSA connection to the default Netware server
> (SMDR-5.0-6) An internal error has occured. The connection number to a
> module is invalid).
>
> I need to connect to the Virtual Machine to be able to backup
> the shared
> storage. It isnt really necessary to backup the nodes as they
> have nothing
> of importance on them.
>
> ANY IDEAS ? I am fishing here....
>
> ANYTHING SPECIFIC THAT I NEED TO LOAD OR RUN ??
>
> I know Netware 6.5 isnt "officially" supported yet (i.e. on the
> compatibility guide - but I have been told that it "should"
> work the same as
> Netware 6.0).
>
> ALL HELP WILL BE APPRECIATED - REWARD CAN BE COLLECTED WHEN
> YOU ARE IN MY
> COUNTRY ...
>
> Regards,
>
> Riaan
>
> --
> Note: To sign off this list, send a "signoff networker"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
> The following message has been received from the Internet.
> Please use with
> caution the message and any attachments
>
>
>
>
> This message has passed through an insecure network.
> All enquiries should be directed to the message author
>
> --
> Note: To sign off this list, send a "signoff networker"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff networker"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
