If you want to do it at the end of a group, you could always try replacing the 
default NSR notification for "Savegroup completion" with a custom script which 
also does the tape eject via "nsrmm -j" (But don't forget : don't discard the 
group completion information which would normally come through). The 
disadvantage of this method is that the tapes remain in all the drives until 
the end of the group, whereas doing it from the post-processing part of 
savepnpc will ensure the tapes are ejected immediately on a client when that 
client has finished. If you do use the savepnpc method, pause a short while 
before ejecting tapes to allow the normal media verification to complete.

Regards
Mick

-----Original Message-----
From: Shawn Cox [mailto:shawn.cox AT PCCA DOT COM]
Sent: 27 August 2003 03:00
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Eject Media after Group finishes?


Actually neither of these installations have jukeboxes/autoloaders.   Both
servers have just scsi dds tape devices hung off the back.
I'll try the pre/post suggestion.  Didn't know if there was something
simpler that I was overlooking.

--Shawn


----- Original Message -----
From: "Shawn Cox" <shawn.cox AT PCCA DOT COM>
To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
Sent: Tuesday, August 26, 2003 3:11 PM
Subject: [Networker] Eject Media after Group finishes?


> Is it possible to eject the tape media from a tape device upon completion
of
> a group?
>
> I'm in the process of converting Backup Exec to legato on a couple of very
> small networks.  The current process ejects the tape from the drive once
the
> backup is complete and I'd like to keep this in place if possible.
>
> --Shawn
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=