Having replaced the card and the drive the last thing to check on the
hardware side is the SCSI cable. If you still get the errors and still
believe it to be hardware then (if you can) swop the drive with another (on
a different controller and hence different SCSI cable) if the fault
transfers with the drive then its the drive at fault. Repeat this with the
card and the cable - doing it this way (when possible) is far better than
replacing parts as the fault should move with the faulty part.

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=