Up to now, all clients have same storage node affinity
and same clone storage node affinity causing some target 
clone streams to go over lan, source parts of the cloning
being inititated from the SN that's filled into the
READ HOST attribute from the jukebox.

A fix ? That's quite easy : use differents pools....

For pool 1, select drives from primary server's tape lib
into pool 1 definition and load only tapes from
pool 1 into the jukebox.
For pool 2, select drives from SN into pool 2 definition
and load only tapes from pool 2 into SN's jukebox.

Then, distribute your 5 copies of the same client into
different groups and assign group 1 to pool 1, .....

When group1 will be lauched, tape into pool 1 will be
requested. Networker will then look at primary server's
jukebox and mount the tape.

When group2 will be launched, tape from pool 2 will be
requested. As primary server's jukebox has no tape from pool2, 
the request will fail and will be forwarded to SN's jukebox 
and save will be send to the SN:jukebox.

HTH,

Th

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

  


-----Original Message-----
From: Neild, Jim [mailto:Jim.Neild AT SSHA.ON DOT CA] 
Sent: Tuesday, June 24, 2003 9:42 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] How to send different savesets from same client
to different servers?


Had the same problem....I would love to know if this can be "fixed"

Jim

-----Original Message-----
From: George Sinclair [mailto:George.Sinclair AT NOAA DOT GOV] 
Sent: Tuesday, June 24, 2003 3:39 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] How to send different savesets from same client to
different servers?


Hi,

I have like 5 instances of the same client, each with different
savesets, group, schedules, etc. I would like to have one of them get
backed up to the primary server's tape library, but the rest I want to
back up to the storage node server's library. Currently, the Storage
nodes field has:

storage_node_server_name
primary_server_name

and this is the same for all the client instances. If I change it on the
particular client instance to instead just say:

primary_server_name

then it changes it for all the instances. How can I set just that one to
be different? Does NetWorker allow this? We're running 6.1.1 under
Solaris 8. Storagenode server is running same but under RedHat Linux
7.3.

Thanks.

George
George.sinclair AT noaa DOT gov

--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=