Couldn't figure out why it has to do with NIC ?, cloning is between the
internal two drives, one read and one write handle by Legato daemon
nsrclone.
I do cloning after all my backup completed using a batch file.
Thanks
Robert
-----Original Message-----
From: Narkinsky, Brian [mailto:Brian.Narkinsky AT dep.state.fl DOT us]
Sent: Wednesday, June 25, 2003 10:07 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] W2K nsrclone I/O error
Gigabit card in the server by chance?
-----Original Message-----
From: Robert Loh [mailto:robert AT SOFTSOURCE.COM DOT SG]
Sent: Tue 6/24/2003 9:49 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Cc:
Subject: [Networker] W2K nsrclone I/O error
Hi all,
On W2K NW 6.1.3 during cloning hitting below error
06/23/2003 11:03:10 AM nsrd: media warning: \\.\Tape0 reading: The
request
could not be performed because of an I/O device error.
Have tried to change the drive, the terminator/cable, upgraded the
ATL M1500
firmware and both HP LTO drives firmware to no avail. Believe must
be
to do
with nsrclone, without problem backing up.
Any clues :) ?
Cheers..
Robert
--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|