Also check firmware on the Library and drives.  I have seen this exact
problem occur on STK L40 with LTO  and old firmware .


----- Original Message -----
From: "Davina Treiber" <treiber AT HOTPOP DOT COM>
To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
Sent: Wednesday, May 07, 2003 1:50 PM
Subject: Re: [Networker] disabling the automatic rewind


> On Tue, 6 May 2003 13:02:14 -0700, Bill Bear <billb AT BOCADA DOT COM> wrote:
>
> >Does anyone know how to prevent the ADIC scalar 100 from doing an
automatic
> >rewind after a write. I get FSF errors and it marks the tape SDLT full
then
> >goes to the next tape.
> >I am using Networker 6.2 NT/ Windows2000
> >- Bill Bear
> >
>
> Are you sure that it is automatic rewind doing this? I have never seen
> Win2K do this. Check that you have all the right drivers for the SDLT tape
> installed. Also check that RSM is disabled.
>
> Note that the jukebox is not controlling this, it is purely related to the
> tape drive.
>
> Also, have you a good reason to use 6.2? You might be better off with
> 6.1.3, although if you have already installed 6.2 on your server you
cannot
> go back due to the res file splitting.
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=