Re: [Networker] IBM 3584 robotic arm must use lun !
2003-05-07 11:40:23
You might be able to get the tape drive to 1.0.0, but the robotics will
show up at 1.0.1. Some jukeboxes give the robotics their own lun,
others associate it with the first tape drive. Looks like yours
associates it wth the drive. The engineer is telling you the way things
are, there is no way to change it.
Why MUST the lun be 1.0.0 for the jukebox?
>Hi All,
>
>I am using AIX 4.3.3 with NW 6.02
>
>the #inquire shown below
>[email protected]:IBM ULT3580-TD1 25D4|Tape
>[email protected]:IBM 03584L32 2460|Autochanger (Jukebox)
>[email protected]:IBM ULT3580-TD1 25D4|Tape
>[email protected]:IBM ULT3580-TD1 25D4|Tape
>[email protected]:IBM ULT3580-TD1 25D4|Tape
>
>Actually I want the jukebox to show as [email protected] by using scsi id
0 for
>autochanger. checking with the IBM engineer as saying that can not be
>configured. Is that true ? Just be peculiar here.
>
>cheers...
>Robert
---
Jim McAlarney Huber Engineered
Materials
phone: 404-949-5505 4401 Northside
Parkway
fax: 404-949-1305 Suite 600
jmcalarney AT huber DOT com Atlanta, GA 30327
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|