Re: [Networker] Persistent Bindings
2003-04-28 11:46:01
On Fri, 25 Apr 2003 10:02:09 -0400, Neild, Jim <Jim.Neild AT SSHA.ON DOT CA>
wrote:
>I am running Networker 6.1.3 on Win2K SP3 with an Alphastor Media
>Manager. My Library is a SAN attached StorageTek L700e with 15 drives,
>with the drives on FC->SCSI bridges. I have Qlogic 2200F HBAs in my
>backup servers. I would like to enable Persistent Bindings for the tape
>drives. Where do I enable this, HBA BIOS or HBA Driver Level? Any
>other "best practices" for SAN attached Libraries that I should be aware
>of?
This is configured in the driver and utilities for your HBA. Until recently
this was not possible with the QL2200 HBA, you may need to hunt around for
updated drivers and utilities that allow this. It's called something like
SANBlade or SANsurfer.
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|