Re: [Networker] SJI Failure error
2003-04-09 17:00:39
Hello Michael,
The "ascdcode" command has been enhanced with many vendor-specific codes
in Networker 7.0. It can be useful in these circumstances:
[jquintei@mymachine]$ascdcode
usage: ascdcode [ -o vendor id [ -p product id ] ] asc ascq
[jquintei@mymachine]$ascdcode 0x80 0x01
ASC/ASCQ(0x80/0x01)
ADIC : picker full prior to command
ATL : transfer full - gripper has cartridge in it
BNCHMARK: Cleaning required (use cleaning tape)
EXABYTE : robot full before move
QUALSTAR: handler full
QUANTUM : Cleaning required
SEAGATE : motor monitor timeout
SPECTRA : picker not empty
TANDBERG: Handler Full
Saludos,
Jose.
Michael Pye wrote:
We have 2 Quantum ATL M1500s with stacklink, on a Sun E250/Solaris7s
running Legato Networker 6.1.1. We are currently getting I/O errors
reported by Networker and cannot load/mount tapes at all.
In an attempt to reset the hardware , using nsrjb -vv -HE, it reports
the following:
hardware_reset:
Jukebox handle being opened at port [email protected]
hardware_reset:
Jukebox handle being closed at port [email protected]
Jukebox handle being opened at port [email protected]
box_inventory:
Jukebox handle being closed at port [email protected]
SJI Failure[0x 29]: Not Ready, ASC 0x80 ASCQ 0x01
Wed 04:56:04 PM SJI Failure[0x 29]: Not Ready, ASC 0x80 ASCQ 0x01
nsrjb: Jukebox error: Wed 04:56:04 PM SJI Failure[0x 29]: Not
Ready, ASC 0x80 ASCQ 0x01
We've tried various ways of reseting the hardware but we think this may
point to a hardware failure ? Can you explain what the SJI error relates
to and what our options are for fixing it. Is it a drive failure ?
Worked fine for several months until now.
--
Michael Pye
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|