Re: [Networker] How to inventory server from storage node?

George,

To inventory a lib, you MUST launch the command from the node that's
controlling
the robotic arm.

As you said, the command will not work like you did.

there is well a way, using nsrexecd, to submit a command
like the following. It also supposes the servers file has correctly
be filled in.

export RUSER=root
export RCMD="nsrjb -s servername -I -S1-10"
or
export RCMD="nsrjb -I -S1-10"
nsrexec -c <target>
 (replace <target> by the server or another storage node)

HTH,

Thierry

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

  


-----Original Message-----
From: George Sinclair [mailto:George.Sinclair AT NOAA DOT GOV] 
Sent: Friday, March 28, 2003 8:37 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] How to inventory server from storage node?


Is it possible to inventory a library attached to the primary server
from a storage node?
We have a jukebox attached to the main server called 'P1000'.

I tried this from the storage node as:

nsrjb -I -j P1000 -s server -S 12-15

also tried:

nsrjb -I -s server -S 12-15 and 'nsrjb -I -S 12-15'

None of these worked. Storage node just complained that it didn't know
about this jukebox or it just errored off. Finally gave up, logged into
primary server and ran: nsrjb -I -S 12-15

In general, can NetWorker commands directed toward server, or server's
attached storage, be run from a storage node?

Any ideas?

Thanks.

George

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=