Re: [Networker] Remote backups using legato

Sorry, it's apparently something new in 6.1.X and 7.0 
I was not aware of. Unless I miss something, I never found 
it in any release notes. World is moving on, Networker too ;-)

Thanks for correcting me.

Thierry

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

  


-----Original Message-----
From: Matts Nilsson [mailto:matts_nilsson AT yahoo DOT com] 
Sent: Wednesday, March 19, 2003 9:30 PM
To: Legato NetWorker discussion; Faidherbe, Thierry
Subject: Re: [Networker] Remote backups using legato


 Thierry, I hate to disagree with you, but unless you
actively choose a label template when you create a
pool, NW versions 6.x and 7 will create a label
template matching the pool you create. The labels will
consist of the name of the pool and a number ranging
from 001 to 999, separated by a ".". Check the popup
message about label templates when you create a pool!

Regards,
Matts

 --- "Faidherbe, Thierry" <Thierry.Faidherbe AT HP DOT COM>
skrev: > Correcting :
> 
> Networker does not create a Label Template by
> default.
> Creating a pool, the default template is used and is
> based on
> the backup server name.
> 
> To correct the problem, call nwadmin and goes to
> customize
> and then label template.
> 
> Build a label template as you like, and give it a
> name.
> Then modify the pool you selected and change the
> label template
> by pointing to the new template you created.
> 
> By default, networker will look at the "next"
> occurrence field 
> based/refering on the template you designed and
> assigned the pool.
> If you want to overwrite the label template, first
> select the pool
> from the label windows and then change the volume
> label field.
> Another way is doing it from CLI (using nsrmm for
> standalone device
> or nsrjb for jukebox)
> 
> HTH,
> 
> Thierry
> 
> Kind regards - Bien cordialement - Vriendelijke
> groeten,
> 
> Thierry FAIDHERBE
> 
> HPCI - Storage & Server Integration Practice 
> Tru64 Unix and Legato EBS Consultant
>                                    
>  *********       *********   HEWLETT - PACKARD
>  *******    h      *******   1 Rue de
> l'aeronef/Luchtschipstraat
>  ******    h        ******   1140
> Bruxelles/Brussel/Brussels
>  *****    hhhh  pppp *****   
>  *****   h  h  p  p  *****   100/102 Blv de la
> Woluwe/Woluwedal
>  *****  h  h  pppp   *****   1200
> Bruxelles/Brussel/Brussels
>  ******      p      ******   BELGIUM
>  *******    p      *******                          
>    
>  *********       *********   Phone :    +32 (0)2  /
> 729.85.42   
>                              Mobile :   +32 (0)498/ 
> 94.60.85 
>                              Fax :      +32 (0)2  /
> 729.88.30   
>      I  N  V  E  N  T        Email :   
> thierry.faidherbe AT hp DOT com
>                              Internet :
> http://www.hp.com/
>
________________________________________________________________________
> 
> MOBISTAR SA/NV 
> 
> SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  /
> 745.75.81  
> Avenue Jean Mermoz, 32          Fax :   +32 (0)2  /
> 745.89.56  
> 6041 GOSSELIES                  Email :
> tfhaidhe AT mail.mobistar DOT be
> BELGIUM                         Web :  
> http://www.mobistar.be/
>
________________________________________________________________________
> 
>   
> 
> 
> -----Original Message-----
> From: Matts Nilsson [mailto:matts_nilsson AT YAHOO DOT COM]
> 
> Sent: Wednesday, March 19, 2003 8:28 PM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] Remote backups using legato
> 
> 
>  Hi,
> Seems like Label Templates are playing a trick on
> you.
> NW automagically creates a Label Template for each
> pool, which determines the look of the label for
> tapes
> labeled to that pool.
> 
> HTH!
> 
> // Matts
> 
>  --- "Day, David" <david.day AT CENTERPULSE DOT COM> skrev:
> >
> 2. In my case (above) Networker labeled the second
> > new tape as XX2 even
> > though the user put in a completely different tape
> > externally labeled as
> > YYY.
> >
> > I'm just beginning to work with stand alone drives
> > and noticed that using
> > the GUI interface to label the tape caused a
> > problem.  I entered the label,
> > then selected the proper pool and continued.  I
> did
> > not realize that by
> > selecting another pool, the label would be
> > overwritten by a default name.
> >
> > There is certainly a setting to make that I have
> not
> > seen yet but something
> > like this may have contributed to this issue.
> >
> > David
> >
> > --
> > Note: To sign off this list, send a "signoff
> > networker" command via email
> > to listserv AT listmail.temple DOT edu or visit the
> list's
> > Web site at
> > http://listmail.temple.edu/archives/networker.html
> > where you can
> > also view and post messages to the list.
> >
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
>
_____________________________________________________
> Gå före i kön och få din sajt värderad på nolltid
> med Yahoo! Express
> Se mer på:
>
http://se.docs.yahoo.com/info/express/help/index.html
> 
> --
> Note: To sign off this list, send a "signoff
> networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> --
> Note: To sign off this list, send a "signoff
> networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= 

_____________________________________________________
Gå före i kön och få din sajt värderad på nolltid med Yahoo! Express
Se mer på: http://se.docs.yahoo.com/info/express/help/index.html

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=