Hi,
I assume you have no other tape drives attached to
your storage nodes. Then you should name your storage
node devices rd=srv1.tele.qc.ca:\\.\Tape0 to
rd=srv1.tele.qc.ca:\\.\Tape5 and
rd=srv2.tele.qc.ca:\\.\Tape0 to
rd=srv2.tele.qc.ca:\\.\Tape5. You should still name
your NW server devices \\.\Tape4 to \\.\Tape9.
Remember that Windows always names the devices
\\.\Tape0 and onwards, I doubt that you can start with
\\.\Tape4. And if the shared devices are all tape
devices seen by the storage nodes, then the first
device is \\.\Tape0.
HTH!
// Matts
--- Stéphane Caron <stcaron AT TELEBEC.QC DOT CA> skrev: >
Hi All,
>
> Actually, I have a Dell 136T library with 6 LTO
> drives attach to a SAN
> switch. I have 6 Dynamic Drive Sharing license and 2
> storage node licenses.
> The legato server is an NT box.
>
> I ran the "jbconfig" command on the networker server
> and I share all the
> devices. I got 6 devices for the legato server
> (\\.\Tape4 to \\.\Tape9), 6
> devices for SRV1 (rd=srv1.tele.qc.ca:\\.\Tape4 to
> rd=srv1.tele.qc.ca:\\.\Tape9) and 6 devices for SRV2
> (rd=srv2.tele.qc.ca:\\.\Tape4 to
> rd=srv2.tele.qc.ca:\\.\Tape9). I already
> got a library with 4 drives on the networker server
> (\\.\Tape0 to
> \\.\Tape3).
>
> I create a special poll and a special group for
> those 2 servers (SRV1 and
> SRV2). In the devices field of that special poll, as
> long as I use the
> drive \\.\Tape4 to \\.\Tape9 I got no problems but I
> don't think that it's
> backing up with the fiber cable because a poor
> speed. When I select the
> drives rd=srv1.tele.qc.ca:\\.\Tape4 to
> rd=srv1.tele.qc.ca:\\.\Tape9 and
> rd=srv2.tele.qc.ca:\\.\Tape4 to
> rd=srv2.tele.qc.ca:\\.\Tape9 in the device
> fields of that special poll, I get those error
> messages. Networker is
> loading a tape and few seconds after; it's trying to
> eject the tape and
> then I get those messages from the jukebox.
>
> 03/18/03 10:06:53 AM nsrd: \\.\Tape3 Eject operation
> in progress
> 03/18/03 10:06:56 AM nsrd: media info: unload retry
> for jukebox `PV136T'
> failed - will retry again.
> 03/18/03 10:06:56 AM nsrd: media info: unload retry
> for jukebox `PV136T':
> sleeping 30 seconds
> 03/18/03 10:06:56 AM nsrd: media info: unload retry
> for jukebox `PV136T':
> sleeping 30 seconds
> ?
>
> Anybody can help???
>
> Thanks,
>
> Stef
>
> --
> Note: To sign off this list, send a "signoff
> networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
_____________________________________________________
Gå före i kön och få din sajt värderad på nolltid med Yahoo! Express
Se mer på: http://se.docs.yahoo.com/info/express/help/index.html
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
