Re: [Networker] SAN storage node
2003-02-24 08:51:06
Hi there;
We have a Win2K Server with a 9740 and 4 x 9840's and 1 x 9840B drive. We have
two of the 9840's attached to an SN3250 and the 9840B is directly attached. We
have a "backup zone" on the FC which currently contains the SN3250 and the
9840B and a designated storage node. Also, if you employ HP / Compaq Fiber
Switches, you may wish to have all tape devices configured to connect
physically to the first 4 ports on the switch. This has to do with determining
the order of discovery of the devices. Keeping a separate zone will keep down
the SCSI bus resets which may occur if you have only one zone and all your
servers can see the fiber devices.
That's how I understand it... :)
Carter Fowler
Hardware Service Technician
Technology Services Division
Off: 519.661.5192
Cel: 519.870.4956
Em: cfowler AT london DOT ca
-----Original Message-----
From: mooney AT DOGBERT.CC.NDSU.NODAK DOT EDU
Sent: Friday, February 21, 2003 10:53 AM
To: mooney AT DOGBERT.CC.NDSU.NODAK DOT EDU; NETWORKER AT LISTMAIL.TEMPLE DOT
EDU
Subject: Re: SAN storage node
In regard to: Re: [Networker] SAN storage node, Bruno Madeira said (at...:
>I have a customer that has a configuration with about 16 SAN Storage
>Nodes and it's +- easy to install.
>
>- One of the problems is the jbconfig, that is quite big (16 SNodes x 6
>drives + Server = 102 devices). Make a text file with all the answers to
>the questions that the jbconfig will make, after a while it will be the
>same answers;
>- We have a ADIC Scalar 100 SDLT with 6 drives and a SNC5101 (SCSI-FC);
>- Make sure that the HBA can do persistent binding (Legato wont support
>HBA's that doesn't do it), for ex. Emulex (not QLOGIC).
Bruno, can you expound on this a bit more? I'm the NetWorker expert at
our site, but I can't say I'm a SAN expert yet. We're looking to hook our
SCSI-based STK9710 library with SDLT drives into one of our two fabrics
using a pair of STK SN3250 FC<->SCSI routers. For the forseeable future,
the only thing that would be in that zone would be the host's HBA
and the two SN3250s.
I had been planning on using the QLogic 2300 HBA in the Linux box that
will be our new NetWorker server.
Tim
--
Tim Mooney mooney AT dogbert.cc.ndsu.NoDak DOT edu
Information Technology Services (701) 231-1076 (Voice)
Room 242-J6, IACC Building (701) 231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|