Re: [Networker] Mixed Media Roboter
2002-11-27 05:15:47
Stefan,
I have a STK robot with mixed drives : 9840 B and 9940 B. For the backup, you
can create separate pools, one for 9840 tapes and another for 9940. The problem
comes with the restore, Networker will not known where he has to mount the tape
(9840 drive or 9940 ?) To resolve this, you can define differents Robots in
Networker with jbconfig. I have defined one robot for drives 9840 and another
for drives 9940. It works fine. Note that I have ACSLS Libstat on a mainframe
machine for tape mount. If you don't have ACSLS, I think you have to install
Smartmedia.
Regards.
National Bank of Belgium.
Pierre.
-----Original Message-----
From: Stefan Bartels [mailto:stefan.bartels AT HAMBURG-MANNHEIMER DOT DE]
Sent: woensdag 27 november 2002 10:04
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Mixed Media Roboter
Hi,
I have a STK9710 attached to the Legato Server (6.1.2 WindowsNT) with DLT7000
drives. I will change some of the 7 drives with SDLT320 drives. Have anybody
experience with mixed media environments?
Stefan Bartels
ITERGO Informationsgesellschaft mbH
Hamburg, Germany
--
Note: To sign off this list, send a "signoff" command via email to listserv AT
listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also view and
post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|