Hi.

I have the same problem from time to time with our StorageTek 9710. Nice tip 
about cleaning the fingers on the robotics.

/Roberto

-----Original Message-----
From: Tsallos Christos [mailto:Christos.Tsallos AT EINSTEINET DOT DE]
Sent: segunda-feira, 11 de novembro de 2002 10:47
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Hardware Problem STK L700 and STK 9840 Tape Devices


Hi NetWorkers,

A second problem I have seems to be a real hardware related one:
>From time to time (mostly on weekends) specific Tapes realy stuck in the
STK 9840 Tape Devices (STK L700 Library) and when the hand assy pulls
this tape out with force this tape then is an bad cross possition in the
hand assy. The Library stopps working, sending I/O error.
I tried a hundred things and we had StorageTek about 25 time on site to
solve the problem.
I have a customer with about the same hardware and he reports problems
like this too.

Is there anybody out there who has the same problem. I suggest that this
is a constructional flaw of the STK 9840 Tape Devices.

Cheers

Christos Tsallos
Senior Consultant SAN
____________________________________________

EINSTEINet GmbH
Data Center Hamburg
Obenhauptstr. 12-14, D-22335 Hamburg
Tel.: +49 (0) 40-3006-4049
Fax: +49 (0) 40-3006-4047
Mobil: 0172-8544729

mailto:christos.tsallos AT einsteinet DOT de
http://www.einsteinet.de
____________________________________________


--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=