You must use either AlphaStor or SmartMedia. NetWorker doe snot support
mixed media out of the box.

In AlphaStor you will have to segment the physical library into multiple
virtual libraries within AS.
SmartMedia will handle this out of the box with one library definition.

If you have more questions, please e-mail AlphaStor AT legato DOT com

Regards

Shaun Ellis
NetWorker Management Product Manager
LEGATO Systems Inc
3210, Porter Drive
Palo Alto
Ca 94304

Phone: +1 (650) 842 9548
Mobile: +1 (408) 431 6997


> -----Original Message-----
> From: Vikas Saini [mailto:vikas AT agilestorage DOT com]
> Sent: Thursday, November 07, 2002 11:39 AM
> To: Legato NetWorker discussion
> Subject: Help needed for problem related Mixed Drives and Barcodes
>
>
> Hi Guys,
>         I have problems related to Mixed Drives and barcodes.
> I have a L40 tape
> library with DLT, SDLT and LTO drives in it. whenever i try
> to do inventory
> with all drives, i get "incompatible medium installed". i
> tried to overcome
> this problem by using specific barcodes for differ media
> types like s1 for
> SDLT and small "d" for DLT. but somehow it is still the same
> problem. any
> suggestion related to these problem are welcome. few things
> which i really
> wanted to know
>
> 1)      where can i mention barcode rules in networker. like
> barcode ending with
> s1 or s2 is for sdlt , ending with d for DLT and rest for LTO
> like that
> 2)      how do i know what barcode format library support 6
> character or 8
> character . is there any thing on library which can be used to change
> barcode setting ...this is very specific to L40 tape library.
> 3) what is the ideal way to use mixed drive in a tape
> library. do i really
> need smartmedia or something like that for this.
>
> Any suggestions are most welcome
>
> Thanks
> Vikas
>
>
> -----Original Message-----
> From: Legato NetWorker discussion
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]On Behalf Of Paul Crossman
> Sent: Thursday, November 07, 2002 11:24 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Accessing savesets from deleted clients
>
>
> I'm pretty sure I've seen this discussed before, but I can't find
> anything related in the archives.
>
> I have an old client that I'd like to look at indexes for so
> that I can
> determine data from that client is recoverable.
>
> I have the old index zipped up.
>
> How can I get the data I'm after?
>
> I've tried just unzipping the index and creating a dummy client.  The
> index list says there's a 12MB index but no savesets listed.
>
> I need to get this information to decide whether we spend $3000 on a
> drive recovery or not.
>
> Thanks,
> Paul C.
>
>
> --
> Paul Crossman @ Wildfire Communications, Inc.
> Senior Unix Systems Administrator
> Phone & Fax:  781-778-3517
> Email:  pcrossma AT wildfire DOT com
>
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>


--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=