Hi Jessica,

Just a guess here, but have you looked at /usr/kernel/drv/lus.conf?  If the
Sun's FCAL adapter is not listed, it my not query it since it doesn't know that
it's a FCAL adapter.  Also, you mention that you use the '-l' option.  If you
know your luns, the limit can be set in this file.

BTW, 'lus' is Legato's SCSI User Interface Tap.

Regards,
        /\/elson

On Fri, 1 Nov 2002, Jessica Kelley wrote:

> Yesterday an ADIC Scalar 1000 tape library was connected via fibre channel
> (using Sun's fibre channel card) to a Sun E450 backup host running Solaris
> 8.  (This is the second ADIC Scalar 1000 library that's attached to this
> backup host.)  The OS sees the new tape library and all of the tape drives
> but inquire and jbconfig fail to use the tape library.  I'm running Legato
> Networker version 6.1.2.
>
> # luxadm probe
> No Network Array enclosures found in /dev/es
>
> Found Fibre Channel device(s):
>   Node WWN:10000060451630e7  Device Type:Tape device
>     Logical Path:/dev/rmt/5n
>     Logical Path:/dev/rmt/6n
>     Logical Path:/dev/rmt/7n
>     Logical Path:/dev/rmt/8n
>     Logical Path:/dev/rmt/9n
>     Logical Path:/dev/rmt/10n
> # mt -f /dev/rmt/5cbn status
> Quantum DLT7000 tape drive:
>    sense key(0x0)= No Additional Sense   residual= 0   retries= 0
>    file no= 0   block no= 0
> # inquire -l
>
> -l flag found: searching all LUNs, which may take over 10 minutes per
> adapter
>         for some fibre channel adapters.  Please be patient.
>
> [email protected]:SEAGATE ST34371W SUN4.2G7462|Disk, /dev/rdsk/c0t0d0s2
> [email protected]:EXABYTE EXB-8505SMBANSH20098|Tape, /dev/rmt/0cbn
> [email protected]:TOSHIBA XM5701TASUN12XCD2395|CD-ROM, /dev/rdsk/c1t6d0s2
> [email protected]:FUJITSU MAB3091S SUN9.0G1505|Disk, /dev/rdsk/c2t0d0s2
> [email protected]:SEAGATE ST39204LCSUN9.0G4207|Disk, /dev/rdsk/c2t3d0s2
> [email protected]:FUJITSU MAB3091S SUN9.0G2107|Disk, /dev/rdsk/c3t0d0s2
> [email protected]:SEAGATE ST39204LCSUN9.0G4207|Disk, /dev/rdsk/c3t1d0s2
> [email protected]:QUANTUM DLT7000         2565|Tape, /dev/rmt/4cbn
> [email protected]:QUANTUM DLT7000         2561|Tape, /dev/rmt/1cbn
> [email protected]:ADIC    Scalar 1000     3.00|Autochanger (Jukebox)
> [email protected]:QUANTUM DLT7000         2561|Tape, /dev/rmt/2cbn
> [email protected]:QUANTUM DLT7000         2565|Tape, /dev/rmt/3cbn
>
> Has anyone else seen this problem?  Any suggestions on how to fix this
> problem?
>
> Thank you,
> Jessica Kelley
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
~~ ** ~~  If you didn't learn anything when you broke it the 1st ~~ ** ~~
                        time, then break it again.

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=