My 2 cents :
Seems to be DNS/FQDN/NFQDN prob.

Maybe just adding/filling correctly the alias field
in the client's config can help ....

HTH,

Thierry


Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 ***
CHANGED *** 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________
_____

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________
_____

  


-----Original Message-----
From: Wes Ono [mailto:wono AT LEGATO DOT COM] 
Sent: Tuesday, October 15, 2002 3:56 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] backup client from another windows domain


Bob,

The NetWorker server is saying, "this client name is not one that I
recognize".  This is a name resolution issue where the server and client
don't agree on the client's name.

It is important to make sure that both server and client have the same
names
for each other.

Windows 2000 can include the Windows domain name as part of the FQDN.
For
example, xyz.<domain>.legato.com instead of the expected xyz.legato.com.

By the way, you should be using NetWorker 5.7 or 6.something to back up
Windows 2000.  5.5.x does not understand the Windows 2000 system state.

Wes

-----Original Message-----
From: Bob Schuknecht [mailto:Bob_Schuknecht AT HILTON DOT COM]
Sent: Tuesday, October 15, 2002 8:49 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] backup client from another windows domain


It seems to me that you would be getting a different error message if
your
problem were DNS related.

"XXXXX is not a registered client" indicates a Networker config issue to
me.


>  -----Original Message-----
> From:         "Legato NetWorker discussion"
> <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>@INTERNET@HHC   On Behalf Of "Emmanuel
> BRAY" <emmanuel.bray AT IFRANCE DOT COM>
> Sent: Tuesday, October 15, 2002 6:47 AM
> To:   NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject:      [Networker] backup client from another windows domain
>
> Hello,
> I'm using Networker 5.5.3,
> my backup server (nt4) is on one domain and my client (windows 2000)
is on
> another one.
> problem:
> I can't backup the client, error message: "my_w2k_client is not a
> registered client"...
> I modifiy host file to provide communication between them,
> the network server interface is configured.
> Is it a problem of:
> -> network communication ? "my_w2k_client" is a dns name even if a
remove
> it from the client alias (because dns is not workink between the two
> domain)
> -> NT right because there's no approbation ?
> -> something else ?
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=