Networker

Re: [Networker] Jukebox Config w/ STK L180

2002-08-13 11:44:37
Subject: Re: [Networker] Jukebox Config w/ STK L180
From: "Passanesi, Scott" <spassanesi AT ESTEE DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Tue, 13 Aug 2002 11:46:19 -0400
To confirm, the tape will not auto-eject after writing is complete but it
will eject if another tape is required to continue writing?


-----Original Message-----
From: Davina Treiber [mailto:treiber AT HOTPOP DOT COM]
Sent: Tuesday, August 13, 2002 11:44 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Jukebox Config w/ STK L180

On Tue, 13 Aug 2002 11:40:27 -0400, Passanesi, Scott <spassanesi AT ESTEE DOT 
COM>
wrote:

>If that is the case, what is the purpose of a using this library?  I would
>need someone to monitor Legato to eject tapes as they are marked full and
>mount a blank so the backup can continue.  That does not sound efficient at
>all.  Is this lack of auto-eject a Legato issue?

The tape will be ejected when NetWorker detects that the drive is needed to
mount another tape in. It all "just works".

>
>-----Original Message-----
>From: Davina Treiber [mailto:treiber AT HOTPOP DOT COM]
>Sent: Tuesday, August 13, 2002 11:38 AM
>To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
>Subject: Re: [Networker] Jukebox Config w/ STK L180
>
>On Tue, 13 Aug 2002 11:11:21 -0400, Passanesi, Scott <spassanesi AT ESTEE DOT 
>COM>
>wrote:
>
>>Hi all,
>>
>>We are running Networker 6.1.2 on Solaris 8 with an STK L180 library.  We
>>are having an issue with the drives/library auto ejecting media after a
>>period of time during which they are not used, ie: 15 minutes.  Is there a
>>setting we are missing?  Automedia management is se to on and the eject
>>times are set within the jukebox configuration.
>>
>
>What are you saying here? Are you saying that you want them to eject but
>they don't? If so, it could be because this setting only applies to shared
>libraries. If you don't have a shared library the tapes will never auto-
>eject.
>
>--
>Note: To sign off this list, send a "signoff" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>--
>Note: To sign off this list, send a "signoff" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=