Re: [Networker] Trouble with a Tru64 system

Stan,

The date ( Dec 31 19:00:00 GMT-0500 1969) is the 1/1/1970 0:00 but
displayed using  GMT -5 timezone.

I saw that problem when DNS or /etc/hosts was not correctly
or not completely (FQDN & NFQDN) filled.

I suggest you to :
        - fill /etc/hosts correctly
        - check for /nsr/res/servers file filled correctly
        - check if nsrexecd runs on the client
        - check for aliases in the client's alias field.
       - check for possible corruption (or error) in the /etc/hosts
        - check for possible FW

I also saw that error when the client has multiple NIC cards not
properly resolvable.

Hope that helps,

Thierry

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant

                             HEWLETT - PACKARD 
                             Compaq Computers, a member of the new HP
 *********       *********   1 Rue de l'aeronef/Luchtschipstraat
 *******    h      *******   1140 Bruxelles/Brussel/Brussels
 ******    h        ******  
 *****    hhhh  pppp *****   Hewlett-Packard Belgium
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32(0)2/729.85.42   
                             Mobile :   +32(0)478/50.51.36 
                             Fax :      +32(0)2/729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/



-----Original Message-----
From: Stan Horwitz [mailto:stan AT TEMPLE DOT EDU] 
Sent: Friday, August 02, 2002 5:30 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Trouble with a Tru64 system


Our NetWorker server runs the Power Edition of Networker 6.1.1 under the
Tru64 Unix 4.0f operating system. I have run into a problem adding a
system called gs873ps to the backup schedule.  The client in question
runs
Tru64 5.1a with Networker 6.1.1. When I try to back up that system, it
fails with a strange error that I can recreate via a probe.

I do not understand why this is failing.

Here's the results of a probe:

# savegrp -p -l full test
* gs873ps:All nsrexec: authtype nsrexec
* gs873ps:All savefs: nothing to save
  savefs gs873ps: failed.
gs873ps:All             level=full, pool=others, save as of Wed Dec 31
19:00:00 GMT-0500 1969
gs873ps:index           level=full, pool=others, save as of Wed Dec 31
19:00:00 GMT-0500 1969

What I do not understand is why this is happening and where that Dec 31,
1969 date comes from. This gs873ps system has about twenty volumes, some
reside on a Compaq Storageworks SAN. I can see all the volumes from our
backup server. Both systems can ping each other and resolve each other's
hostname, yet this isn't working. Any suggestions as to why will be
appreciated.

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=