|
Re: [Bacula-users] Hostname not found
2017-02-10 11:25:23
How do you client config look like for crey-fd? It must be something like:
Client {
Name = crey-fd
Address = <hostname>
...
}
If you specify a hostname for Address this hostname must be resolvable.
Did you check this?
Mike
On 02/10/2017 05:02 PM, Dan Langille wrote:
> NOTE: this message is not about resolving the permissions error. It is
> about [what appears to be] a DNS issue.
>
> Please help me understand which hostname is not being resolved in these
> messages. My checks with dig to verify DNS have found no errors.
>
> I have checked:
>
> Client: crey-fd
> Read Storage: "bacula-sd-01-file"
> Write Storage: "tape01" (From Job resource)
>
> I've checked the bacula configuration files, looked for the Address, and
> run 'dig +short' on the hostname
>
> Then, with the IP address from the previous dig, I do 'dig +short -x'.
> I get the original hostname.
>
> Ideas please?
>
>
>
> First email:
> ###
> 10-Feb 15:17 bacula-dir JobId 256313: Warning: FileSet MD5 digest not found.
> 10-Feb 15:17 bacula-dir JobId 256313: The following 1 JobId was chosen
> to be copied: 255998
> 10-Feb 15:17 bacula-dir JobId 256313: Copying using JobId=255998
> Job=slocum_jail_snapshots.2017-02-05_03.04.00_46
> 10-Feb 15:17 bacula-dir JobId 256313: Bootstrap records written to
> /usr/local/bacula/working/bacula-dir.restore.27.bsr
> 10-Feb 15:17 bacula-dir JobId 256313: Start Copying JobId 256313,
> Job=CopyToTape-Full-LTO4.2017-02-10_15.17.52_17
> 10-Feb 15:17 bacula-dir JobId 256313: Using Device "vDrive-0" to read.
> 10-Feb 15:17 bacula-sd-01-sd JobId 256313: Ready to read from volume
> "FullAuto-1369" on file device "vDrive-0" (/usr/local/bacula/volumes).
> 10-Feb 15:17 bacula-sd-01-sd JobId 256313: Forward spacing Volume
> "FullAuto-1369" to file:block 0:214.
> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Error: bsock.c:453 Wrote 3814
> bytes to client:Hostname not found:9103, but only 0 accepted.
> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Fatal error: read.c:284 Error
> sending to File daemon. ERR=Broken pipe
> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Elapsed time=00:00:08,
> Transfer rate=14.46 K Bytes/second
> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Error: bsock.c:375 Socket has
> errors=1 on call to client:Hostname not found:9103
> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Fatal error: fd_cmds.c:142
> Read data not accepted
> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Error: bsock.c:375 Socket has
> errors=1 on call to client:Hostname not found:9103
> 10-Feb 15:18 bacula-dir JobId 256313: Error: Bacula bacula-dir 7.4.4
> (28Sep16):
> Build OS: amd64-portbld-freebsd11.0 freebsd 11.0-RELEASE-p6
> Prev Backup JobId: 255998
> Prev Backup Job: slocum_jail_snapshots.2017-02-05_03.04.00_46
> New Backup JobId: 256314
> Current JobId: 256313
> Current Job: CopyToTape-Full-LTO4.2017-02-10_15.17.52_17
> Backup Level: Full
> Client: crey-fd
> FileSet: "EmptyCopyToTape" 2011-02-20 20:53:31
> Read Pool: "FullFile" (From Job resource)
> Read Storage: "bacula-sd-01-file" (From Pool resource)
> Write Pool: "FullsLTO4" (From Job resource)
> Write Storage: "tape01" (From Job resource)
> Catalog: "MyCatalog" (From Client resource)
> Start time: 10-Feb-2017 15:17:55
> End time: 10-Feb-2017 15:18:05
> Elapsed time: 10 secs
> Priority: 430
> SD Files Written: 9
> SD Bytes Written: 115,699 (115.6 KB)
> Rate: 11.6 KB/s
> Volume name(s):
> Volume Session Id: 98
> Volume Session Time: 1486562541
> Last Volume Bytes: 0 (0 B)
> SD Errors: 3
> SD termination status: Error
> Termination: *** Copying Error ***
> ###
>
> Second email, which corresponds to the above copy job:
> ###
> 10-Feb 15:17 bacula-dir JobId 256314: Using Device "LTO_0" to write.
> 10-Feb 15:17 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive
> 0" command: ERR=Child exited with code 1.
> Results=cannot open SCSI device '/dev/pass3' - Permission denied
>
> 10-Feb 15:17 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive
> 0" command: ERR=Child exited with code 1.
> Results=cannot open SCSI device '/dev/pass3' - Permission denied
>
> 10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive
> 0" command: ERR=Child exited with code 1.
> Results=cannot open SCSI device '/dev/pass3' - Permission denied
>
> 10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive
> 0" command: ERR=Child exited with code 1.
> Results=cannot open SCSI device '/dev/pass3' - Permission denied
>
> 10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive
> 0" command: ERR=Child exited with code 1.
> Results=cannot open SCSI device '/dev/pass3' - Permission denied
>
> 10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive
> 0" command: ERR=Child exited with code 1.
> Results=cannot open SCSI device '/dev/pass3' - Permission denied
>
> 10-Feb 15:18 tape01-sd JobId 256314: 3304 Issuing autochanger "load slot
> 10, drive 0" command for vol 000013L4.
> 10-Feb 15:18 tape01-sd JobId 256314: Fatal error: 3992 Bad autochanger
> "load slot 10, drive 0": ERR=Child exited with code 1.
> Results=cannot open SCSI device '/dev/pass3' - Permission denied
> ###
>
> --
> Dan Langille - BSDCan / PGCon
> dan AT langille DOT org <mailto:dan AT langille DOT org>
>
>
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>
>
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|
