Thanks for doing the tests. Yes, I think there is likely a bug here. I would appreciate it if you would copy and paste what you wrote here into a bug report as you suggested :-)
Best regards,
Kern
On 03/28/2016 12:49 PM, Ana Emília M. Arruda wrote:
Hello Kern,
I have been running some tests and it seems that the "Set state=error or
double code" appears always for options wildfile, wilddir, regexfile and
regexdir. I run tests with the option "wild" and "regex" and they gave
no error:
1) using wild = "*.data*" and regexfile = ".*" (for regexfile the error
appears in the trace file).
bacula-server-fd: job.c:1621-81 Fileset: I
bacula-server-fd: job.c:1227-81 Item: I
bacula-server-fd: job.c:1621-81 Fileset: O MZ6
bacula-server-fd: job.c:1227-81 Item: O MZ6
bacula-server-fd: job.c:1621-81 Fileset: W *.data*
bacula-server-fd: job.c:1227-81 Item: W *.data*
bacula-server-fd: job.c:1621-81 Fileset: N
bacula-server-fd: job.c:1227-81 Item: N
bacula-server-fd: job.c:1621-81 Fileset: O e
bacula-server-fd: job.c:1227-81 Item: O e
bacula-server-fd: job.c:1621-81 Fileset: RF .*
bacula-server-fd: job.c:1227-81 Item: RF .*
bacula-server-fd: job.c:1235-81 Subcode=70.
bacula-server-fd: job.c:1256-81 Set state=error or double code. Subcode=70.
2) using wild = "*.data*" and regex = ".*" (using these two no error
appears in the trace file).
bacula-server-fd: job.c:1621-83 Fileset: I
bacula-server-fd: job.c:1227-83 Item: I
bacula-server-fd: job.c:1621-83 Fileset: O MZ6
bacula-server-fd: job.c:1227-83 Item: O MZ6
bacula-server-fd: job.c:1621-83 Fileset: W *.data*
bacula-server-fd: job.c:1227-83 Item: W *.data*
bacula-server-fd: job.c:1621-83 Fileset: N
bacula-server-fd: job.c:1227-83 Item: N
bacula-server-fd: job.c:1621-83 Fileset: O e
bacula-server-fd: job.c:1227-83 Item: O e
bacula-server-fd: job.c:1621-83 Fileset: R .*
bacula-server-fd: job.c:1227-83 Item: R .*
bacula-server-fd: job.c:1621-83 Fileset: N
bacula-server-fd: job.c:1227-83 Item: N
bacula-server-fd: job.c:1621-83 Fileset: F /opt/bacula/bin
bacula-server-fd: job.c:1227-83 Item: F /opt/bacula/bin
It seems to me that Item "WF", "WD", "RF" and "RD" are giving the "Set
state=error or double code" messages (I introduced the "Item" word and
Subcode=%d for debugging). If you think this is a bug, I can open a bug
request with more detailed information.
In the output there was an error from the FD when debug information was
turned on. It pertained to the Exclude = xxx that was in that particular
email.
The FileSet shown below looks perfectly good to me. Note: in some older
version, there was a problem with compression when both libgzip and
liblzo2 and their development versions were not loaded on the machine
used to build the FD. This is currently fixed, so I would recommend you
move up to 7.4.x if you can, but that is not always so simple.
Best regards,
Kern
On 03/27/2016 10:28 AM, Randy Katz wrote:
> Kern, if you have been following this my fileset is quite
default, does
> not receive an error, and still does not compress,
> only on one client out of about 40:
>
> FileSet {
> Name = "client-28-filesetdefinition"
> Include {
> Options {
> signature = MD5
> compression = GZIP
> }
> File = /
> }
> Exclude {
> File = /tmp
> File = /proc
> File = /.journal
> File = /.fsck
> File = /home/virtfs
> }
> }
>
> On 3/26/2016 5:09 PM, Kern Sibbald wrote:
>> Note, the minute you get a message like:
>>
>> bacula-fd: job.c:781-415 Set state=error or double code
>>
>> all bets are off. I am not sure what the code will do, but Bacula
>> thinks you have an error in your fileset, so until you correct
it, any
>> other problems could be a result of this.
>>
>> Best regards,
>> Kern
>>
>>
>> On 03/25/2016 06:45 AM, More, Ankush wrote:
>>> Hello Randy,
>>>
>>> Bacula server(7.x) is installed with Linux RPM package.
>>>
>>> Catalog backup on bacula server work with compression = GZIP
option.
>>>
>>> Job log:
>>>
>>> Software Compression: 84.9% 6.6:1
>>>
>>> But clients does not work
>>>
>>> Job log:
>>>
>>> Software Compression: None
>>>
>>> Thank you,
>>>
>>> Ankush More
>>>
>>> *From:*Randy Katz [mailto:rkatz AT simplicityhosting DOT com
<mailto:rkatz AT simplicityhosting DOT com>]
>>> *Sent:* Thursday, March 24, 2016 8:10 PM
>>> *To:* More, Ankush
>>> *Subject:* Re: [Bacula-users] Client backup with compress
>>>
>>> Then the only other thing I could think of is if the director is
>>> compiled with
>>> the gzip/lzo libraries, have you recompiled that? Should not be too
>>> hard, you don't
>>> need that long configure line, if using mysql all you need is:
>>>
>>> ./configure --with-mysql
>>>
>>>
>>> On 3/24/2016 6:54 AM, More, Ankush wrote:
>>>
>>> Hi Randy,
>>>
>>> Backing up are Database files which has very high
compression ratio.
>>>
>>> I have check same files with linux command ‘gzip’ on
client working
>>> fine with good compression ratio.
>>>
>>> But Bacula does not work.
>>>
>>> Thank you,
>>>
>>> Ankush More
>>>
>>> *From:*Randy Katz [mailto:rkatz AT simplicityhosting DOT com
<mailto:rkatz AT simplicityhosting DOT com>]
>>> *Sent:* Thursday, March 24, 2016 1:18 PM
>>> *To:* bacula-users AT lists.sourceforge DOT net
<mailto:bacula-users AT lists.sourceforge DOT net>
<mailto:bacula-users AT lists.sourceforge DOT net>>
>>> *Subject:* Re: [Bacula-users] Client backup with compress
>>>
>>> Hi Ankush, are you sure the files you are backing up can be
>>> compressed? You might
>>> want to try a separate backup on the same client of
something like
>>> /usr/local /etc
>>> just to test, these should definitely compress. Sometimes
video,
>>> audio and other dense
>>> files do not compress.
>>>
>>> On 3/23/2016 11:44 AM, More, Ankush wrote:
>>>
>>> Hello,
>>>
>>> I re-compile client with LZO package.
>>>
>>> Compression does not work both GZIP or LZO.
>>>
>>> Large file support: yes
>>>
>>> Bacula conio support: yes -lncurses
>>>
>>> readline support: no
>>>
>>> TCP Wrappers support: no
>>>
>>> TLS support: yes
>>>
>>> Encryption support: yes
>>>
>>> ZLIB support: yes
>>>
>>> LZO support: yes
>>>
>>> enable-smartalloc: yes
>>>
>>> enable-lockmgr: no
>>>
>>> bat support: no
>>>
>>> client-only: yes
>>>
>>> build-dird: no
>>>
>>> build-stored: no
>>>
>>> Plugin support: yes
>>>
>>> AFS support: no
>>>
>>> ACL support: yes
>>>
>>> XATTR support: yes
>>>
>>> systemd support: no
>>>
>>> Batch insert enabled: None
>>>
>>> Thank you,
>>>
>>> Ankush More
>>>
>>> *From:*More, Ankush
>>> *Sent:* Wednesday, March 23, 2016 8:46 PM
>>> *To:* 'Heitor Faria'
>>> *Cc:* compdoc AT hotrodpc DOT com
<mailto:bacula-users AT lists.sourceforge DOT net>>
>>> *Subject:* Re: [Bacula-users] Client backup with compress
>>>
>>> Hello, Akush: according to the debug you sent me this
is the
>>> FileSet you are using for this job:
>>>
>>> bacula-fd: job.c:273-415 Executing fileset command.
>>> bacula-fd: job.c:753-415 I
>>> bacula-fd: job.c:753-415 O MZ6
>>> bacula-fd: job.c:753-415 N
>>> bacula-fd: job.c:753-415 O e
>>> bacula-fd: job.c:753-415 WF *.apm
>>> bacula-fd: job.c:781-415 Set state=error or double code.
>>> bacula-fd: job.c:753-415 N
>>> bacula-fd: job.c:753-415 F /oracle
>>> bacula-fd: job.c:753-415 N
>>> bacula-fd: job.c:753-415 N
>>> bacula-fd: job.c:753-415 E
>>> bacula-fd: job.c:753-415 F /var/spool/bacula
>>> bacula-fd: job.c:753-415 F /tmp
>>> bacula-fd: job.c:753-415 F /proc
>>> bacula-fd: job.c:753-415 F /tmp
>>> bacula-fd: job.c:753-415 F /sys
>>> bacula-fd: job.c:753-415 F /.journal
>>> bacula-fd: job.c:753-415 F /.fsck
>>> bacula-fd: job.c:753-415 N
>>>
>>>
>>>
------------------------------------------------------------------------
>>>
>>> *From: *"More, Ankush" <ankush.more AT capgemini DOT com
<mailto:ankush.more AT capgemini DOT com>
>>>
>>> Director Port: 9101
>>>
>>> File daemon Port: 9102
>>>
>>> Storage daemon Port: 9103
>>>
>>> Director User:
>>>
>>> Director Group:
>>>
>>> Storage Daemon User:
>>>
>>> Storage DaemonGroup:
>>>
>>> File Daemon User:
>>>
>>> File Daemon Group:
>>>
>>> Large file support: yes
>>>
>>> Bacula conio support: no -lreadline
-ltinfo
>>>
>>> readline support: yes
>>>
>>> TCP Wrappers support: no
>>>
>>> TLS support: yes
>>>
>>> Encryption support: yes
>>>
>>> ZLIB support: yes
>>>
>>> LZO support: yes
>>>
>>> enable-smartalloc: yes
>>>
>>> enable-lockmgr: no
>>>
>>> bat support: no
>>>
>>> client-only: no
>>>
>>> build-dird: yes
>>>
>>> build-stored: yes
>>>
>>> Plugin support: yes
>>>
>>> AFS support: no
>>>
>>> ACL support: yes
>>>
>>> XATTR support: yes
>>>
>>> systemd support: no
>>>
>>> Batch insert enabled: MySQL
>>>
>>> This message contains information that may be
privileged
>>> or confidential and is the property of the
Capgemini
>>> Group. It is intended only for the person to
whom it is
>>> addressed. If you are not the intended
recipient, you
>>> are not authorized to read, print, retain, copy,
>>> disseminate, distribute, or use this message
or any part
>>> thereof. If you receive this message in error,
please
>>> notify the sender immediately and delete all
copies of
>>> this message.
>>>
>>>
>>>
>>>
------------------------------------------------------------------------------
>>> Transform Data into Opportunity.
>>> Accelerate data analysis in your applications with
>>> Intel Data Analytics Acceleration Library.
>>> Click to learn more.
>>>
>>> http://pubads.g.doubleclick.net/gampad/clk?id=278785351&iu=/4140
>>> _______________________________________________
>>> Bacula-users mailing list
>>> Bacula-users AT lists.sourceforge DOT net
<mailto:Bacula-users AT lists.sourceforge DOT net>
------------------------------------------------------------------------------
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Library.
Click to learn more.
http://pubads.g.doubleclick.net/gampad/clk?id=278785471&iu=/4140
