On Fri, Aug 2, 2013 at 6:16 AM, Iban Cabrillo <cabrillo AT ifca.unican DOT es>
wrote:
> Dear,
> After a bad power-off bacula server, the storage is not able to see
> correct pool-volumes assignment for LTO3 device:
>
> Device status:
> Autochanger "TSM3500" with devices:
> "ULT3580-TD3" (/dev/nst0)
> "ULT3580-TD5" (/dev/nst1)
> Device "FileStorage" is not open or does not exist.
> Device "ULT3580-TD3" (/dev/nst0) is mounted with:
> Volume: L30001L3
> Pool: *unknown*
> Media type: LTO-3
> Slot 3 is loaded in drive 1.
> Total Bytes Read=0 Blocks Read=0 Bytes/block=0
> Positioned at File=0 Block=0
> Device "ULT3580-TD5" (/dev/nst1) is mounted with:
> Volume: B00692LV
> Pool: Pool1
> Media type: LTO-5
> Slot 40 is loaded in drive 0.
> Total Bytes=1,024 Blocks=0 Bytes/block=1,024
> Positioned at File=0 Block=0
> ====
> But the volumes from pool are correctly showed:
>
> *list volume pool=Incr
> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
> | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
> VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
> |
> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
> | 10 | L30016L3 | Full | 1 | 430,674,056,192 | 910 |
> 31,536,000 | 1 | 17 | 1 | LTO-3 | 2013-07-21 09:40:44 |
> | 61 | L30006L3 | Append | 1 | 18,680,747,008 | 21 |
> 31,536,000 | 1 | 7 | 1 | LTO-3 | 2013-07-27 18:08:20 |
> | 67 | L30010L3 | Append | 1 | 1,024 | 0 |
> 7,776,000 | 1 | 11 | 1 | LTO-3 | 0000-00-00 00:00:00 |
> | 68 | L30017L3 | Append | 1 | 37,661,717,504 | 46 |
> 7,776,000 | 1 | 18 | 1 | LTO-3 | 2013-07-31 19:56:15 |
> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
>
> Any idea? Is the anything wrong on DB?
>
Is this causing you a real problem? Unknown in for the pool happens if
a tape is loaded in a drive but no jobs have run on that tape.
John
------------------------------------------------------------------------------
Get your SQL database under version control now!
Version control is standard for application code, but databases havent
caught up. So what steps can you take to put your SQL databases under
version control? Why should you start doing it? Read more to find out.
http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
