No, just Spool Attributes = yes. g.
On Fri, Dec 16, 2011 at 3:27 AM, Marcello Romani
<mromani AT ottotecnica DOT com> wrote:
> Il 15/12/2011 20:31, gary artim ha scritto:
>> will do, interestingly I picked another slot on my autochanger
>> (different lto vol) and got (see below), running a peak time no less.
>> Last nite I ran a 9pm, the hours of the dead, and was getting about
>> 2.4gb min, today 2.66gb min. -- go figure...
>>
>> 15-Dec 10:58 bacula-dir JobId 1: Bacula bacula-dir 5.0.3 (04Aug10):
>> 15-Dec-2011 10:58:11
>> Build OS: x86_64-redhat-linux-gnu redhat
>> JobId: 1
>> Job: Prodbackup.2011-12-15_09.20.55_03
>> Backup Level: Full
>> Client: "bacula-fd" 5.0.3 (04Aug10)
>> x86_64-redhat-linux-gnu,redhat,
>> FileSet: "FileSetProd" 2011-12-15 09:20:55
>> Pool: "FullProd" (From Job FullPool override)
>> Catalog: "MyCatalog" (From Client resource)
>> Storage: "LTO-4" (From Job resource)
>> Scheduled time: 15-Dec-2011 09:20:47
>> Start time: 15-Dec-2011 09:20:58
>> End time: 15-Dec-2011 10:58:11
>> Elapsed time: 1 hour 37 mins 13 secs
>> Priority: 10
>> FD Files Written: 35,588
>> SD Files Written: 35,588
>> FD Bytes Written: 257,543,473,820 (257.5 GB)
>> SD Bytes Written: 257,548,885,611 (257.5 GB)
>> Rate: 44152.8 KB/s
>> Software Compression: None
>> VSS: no
>> Encryption: no
>> Accurate: no
>> Volume name(s): fufu01
>> Volume Session Id: 1
>> Volume Session Time: 1323969555
>> Last Volume Bytes: 257,601,203,200 (257.6 GB)
>> Non-fatal FD errors: 0
>> SD Errors: 0
>> FD termination status: OK
>> SD termination status: OK
>> Termination: Backup OK
>>
>>
>>
>> On Thu, Dec 15, 2011 at 11:25 AM, John Drescher <drescherjm AT gmail DOT
>> com> wrote:
>>> On Thu, Dec 15, 2011 at 2:24 PM, gary artim <gartim AT gmail DOT com> wrote:
>>>> no, seperate drive. g.
>>>>
>>>
>>> Try enabling attribute spooling. Like the other poster said.
>>>
>>> John
>>
>> ------------------------------------------------------------------------------
>> 10 Tips for Better Server Consolidation
>> Server virtualization is being driven by many needs.
>> But none more important than the need to reduce IT complexity
>> while improving strategic productivity. Learn More!
>> http://www.accelacomm.com/jaw/sdnl/114/51507609/
>> _______________________________________________
>> Bacula-users mailing list
>> Bacula-users AT lists.sourceforge DOT net
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
> Was that job run supposed to use data spooling ? I ask because I have
> SpoolData = yes in job definitions (and that automatically enables
> SpoolAttributes = yes, btw), and I get messages like this:
>
> 15-dic 21:47 serverlinux-dir JobId 7965: Start Backup JobId 7965,
> Job=FileServerTape.2011-12-15_21.15.00_18
> 15-dic 21:47 serverlinux-dir JobId 7965: Using Device "TapeStorage"
> 15-dic 21:47 serverlinux-dir JobId 7965: FD compression disabled for
> this Job because AllowCompress=No in Storage resource.
> 15-dic 21:48 serverlinux-sd JobId 7965: Recycled volume "ThursdayTape"
> on device "TapeStorage" (/dev/nst0), all previous data lost.
> 15-dic 21:48 serverlinux-sd JobId 7965: Spooling data ...
> 15-dic 23:10 serverlinux-sd JobId 7965: Job write elapsed time =
> 01:22:17, Transfer rate = 8.879 M Bytes/second
> 15-dic 23:10 serverlinux-sd JobId 7965: Committing spooled data to
> Volume "ThursdayTape". Despooling 43,882,656,406 bytes ...
> 15-dic 23:52 serverlinux-sd JobId 7965: Despooling elapsed time =
> 00:42:04, Transfer rate = 17.38 M Bytes/second
> 15-dic 23:54 serverlinux-sd JobId 7965: Sending spooled attrs to the
> Director. Despooling 31,284,446 bytes ...
> 15-dic 23:55 serverlinux-dir JobId 7965: Bacula serverlinux-dir 5.0.2
> (28Apr10): 15-dic-2011 23:55:20
> Build OS: i486-pc-linux-gnu debian 5.0.4
> JobId: 7965
> Job: FileServerTape.2011-12-15_21.15.00_18
> Backup Level: Full
> Client: "fileserver-fd" 2.4.4 (28Dec08)
> x86_64-pc-linux-gnu,debian,lenny/sid
> FileSet: "LinuxDefaultSet" 2011-09-15 09:11:26
> Pool: "Tape" (From Job resource)
> Catalog: "MyCatalog" (From Client resource)
> Storage: "Tape" (From Job resource)
> Scheduled time: 15-dic-2011 21:15:00
> Start time: 15-dic-2011 21:47:57
> End time: 15-dic-2011 23:55:20
> Elapsed time: 2 hours 7 mins 23 secs
> Priority: 11
> FD Files Written: 86,344
> SD Files Written: 86,344
> FD Bytes Written: 43,822,576,114 (43.82 GB)
> SD Bytes Written: 43,839,416,416 (43.83 GB)
> Rate: 5733.7 KB/s
> Software Compression: None
> VSS: no
> Encryption: no
> Accurate: no
> Volume name(s): ThursdayTape
> Volume Session Id: 242
> Volume Session Time: 1323245911
> Last Volume Bytes: 60,996,096,000 (60.99 GB)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status: OK
> SD termination status: OK
> Termination: Backup OK
>
>
> FYI: fileserver is a virtual machine on a different host.
> HP LTO-1 drive, spool area and bacula database are on the same machine
> (postgres, btw).
>
> --
> Marcello Romani
>
> ------------------------------------------------------------------------------
> Learn Windows Azure Live! Tuesday, Dec 13, 2011
> Microsoft is holding a special Learn Windows Azure training event for
> developers. It will provide a great way to learn Windows Azure and what it
> provides. You can attend the event by watching it streamed LIVE online.
> Learn more at http://p.sf.net/sfu/ms-windowsazure
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
------------------------------------------------------------------------------
Learn Windows Azure Live! Tuesday, Dec 13, 2011
Microsoft is holding a special Learn Windows Azure training event for
developers. It will provide a great way to learn Windows Azure and what it
provides. You can attend the event by watching it streamed LIVE online.
Learn more at http://p.sf.net/sfu/ms-windowsazure
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|