On Aug 23, 2011, at 8:43 AM, Adrian Reyer wrote:

> On Tue, Aug 23, 2011 at 01:38:23AM +0200, Olle Romo wrote:
>> What I mean is that if I have a drive removed, run the job then  
>> attach
>> the drive and run the job again, Bacula will do a full backup of the
>> drive even if it previously had done an incremental backup on the  
>> same
>> drive. Ideally I want it to just continue the incremental backup.
>
> Use 2 filesets and 2 jobs. One like you have now, but exclude the
> removable drive, The other only has the removable dribe and you only
> run it when the drive is there, e.g. checked by a pre-script.
>
> Regards,
>       Adrian

That will be the way to go. Problem is I have quite a few drives that  
come and go in different combinations. I still wish I could control  
that particular behavior.

Thanks for the tip :)

Best,
Olle


------------------------------------------------------------------------------
EMC VNX: the world's simplest storage, starting under $10K
The only unified storage solution that offers unified management 
Up to 160% more powerful than alternatives and 25% more efficient. 
Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users