From: Alessandro Bianchi <alex AT skynet DOT it>
To: bacula-users AT lists.sourceforge DOT net
Cc: bill.damage AT yahoo DOT com
Sent: Thu, 14 July, 2011 12:50:14
Subject: Re: Bconsole hangs when connecting to SD after upgrade from Fed 14 to Fed 15
Il 14/07/2011 13:29,
bacula-users-request AT lists.sourceforge DOT net ha
scritto:
Hi - the upgrade wasn't without trouble - we had to preserve the bacula config,
do a clean installation and restore the config/cats etc. So its almost
definitely not a "bacula doesn't work with Fed15 problem" ;-)
What happens is if I restart the services I can see them running fine and the sd
is running as the user "bacula". If I try anything with touches the sd, say in
bconsole even a "status all", the display stops at the first "Connecting to
Storage daemon..." message. However, if I kill the sd process and run it from
root with "bacula-sd -f -v" in another console all is well. There's nothing in
any logs I can see. Whats gives please? Thanks.
Hi
I faced a very similar problem after upgrading from F14 to F15
I had the SD hanging on every operation
I tracked it to a permission problem.
It seems to have some sort of trouble while dropping privileges.
I "fixed" it editing the /etc/syscongif/bacula-sd file and setting
it like follows:
SD_USER=root
SD_GROUP=bacula
I don't like having the SD running as root so before doing that I
worked on permissions on the bacula SD storage area (I'm using the
File storage) with no luck.
Hope this points you in some useful direction.
Besta regards
Alessandro Bianchi
--
SkyNet SRL
Via Maggiate 67/a - 28021 Borgomanero (NO) -
tel.
+39 0322-836487/834765 - fax +39 0322-836608
http://www.skynet.it
Autorizzazione Ministeriale n.197
Le informazioni contenute in questo messaggio sono
riservate e confidenziali ed è vietata la diffusione in
qualunque
modo eseguita.
Qualora Lei non fosse la persona a cui il presente
messaggio è destinato, La invitiamo ad eliminarlo ed a
distruggerlo
non divulgandolo, dandocene gentilmente comunicazione.
Per
qualsiasi informazione si prega di contattare info AT skynet DOT it
(e-mail dell'azienda). Rif. D.L. 196/2003